This site uses cookies and visit counters for operation and statistics. Privacy policy
Found: 60+
Overview ISO 14592-1:2002 specifies a laboratory shake‑flask batch test to evaluate the aerobic biodegradability of organic compounds at low concentrations in natural surface waters, with or without…
1 Scope 1.1 This International Standard specifies two methods for determining compressive properties, in directions parallel to the plane of lamination, of fibre-reinforced plastic composites.
1 Scope This part of ISO 14635 specifies a test method based on an FZG 1) four-square test machine to determine the relative load-carrying capacity of high EP oils defined by the gear surface damage…
1 Scope This part of ISO 140 specifies two series of methods (element methods and global methods) for measurement of the airborne sound insulation of façade elements and whole façades, respectively.…
1 Scope This part of ISO 140 specifies field methods for measuring the impact sound insulation properties of building floors by using a standard tapping machine. The method is applicable to bare floo…
1 Scope This part of ISO 140 concerns field measurements of airborne sound insulation and impact sound insulation, and is to be used as a supplement to ISO 140-4 and ISO 140-7. It contains guidelines…
Overview ISO 14617-5:2002 - Graphical symbols for diagrams - Part 5: Measurement and control devices defines standardized graphical symbols for components and devices used in measurement and control…
Overview ISO 14976:1998 - Surface chemical analysis: Data transfer format is an international standard published by ISO on 1998-07-15 (corrected and reprinted 1999-03-15). At 41 pages, this standard…
Overview ISO 14303:2026 is an international standard developed by the International Organization for Standardization (ISO) that specifies requirements for the interfaces between launch vehicles (LV)…
Overview EN ISO 14819-2:2021/A1:2026 is an amendment to the international standard for Intelligent Transport Systems (ITS), focusing on traffic and travel information messages using traffic message c…
Overview EN ISO 14577-3:2026 (Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks) is a European and International Stand…
Overview EN ISO 14155:2026, titled Clinical investigation of medical devices for human subjects - Good clinical practice (ISO 14155:2026), is an essential European and international standard develope…
Overview EN ISO 14001:2026 - Environmental management systems - Requirements with guidance for use - is an internationally recognized standard developed by CEN with the objective of providing organiz…
Overview SIST EN ISO 14644-13:2026 provides comprehensive guidelines for cleaning surfaces within cleanrooms and associated controlled environments. Developed by the European Committee for Standardiz…
Overview SIST EN ISO 14644-14:2026 is a European and International Standard developed by CEN and ISO for the assessment of equipment suitability in cleanrooms and controlled environments based on air…
Overview SIST EN ISO 14577-5:2026 establishes the methodology for performing linear elastic dynamic instrumented indentation testing (DIIT) to determine the indentation hardness and modulus of metall…
Overview SIST EN ISO 14720-2:2026 specifies standardized methods for determining sulfur content in non-oxidic ceramic raw materials and ceramic materials, especially those capable of complete oxidati…
Overview SIST EN ISO 14720-1:2026 (Testing of ceramic materials - Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials - Part 1: Infrared measurement methods) is a Europe…
Overview EN ISO 14720-1:2026 (Testing of ceramic materials - Determination of sulfur in non-oxidic ceramic raw materials and ceramic materials - Part 1: Infrared measurement methods) is a European an…
Overview EN ISO 14720-2:2026 specifies standardized methods for determining sulfur content in non-oxidic ceramic raw materials and ceramic materials, especially those capable of complete oxidation at…
Overview SIST EN ISO 14245:2021/A1:2026 is a key amendment to the European Standard governing specifications and testing requirements for self-closing valves used on LPG (liquefied petroleum gas) cyl…
Overview SIST EN ISO 14019-2:2026, titled Sustainability information - Part 2: Principles and requirements for verification processes, is a European and international standard developed by CEN and IS…
Overview SIST EN ISO 14019-4:2026 specifies the principles and requirements for bodies that validate and verify declared sustainability information. Developed jointly by CEN and ISO, this standard se…
Overview SIST EN ISO 14019-1:2026, Sustainability information - Part 1: General principles and requirements for validation and verification, establishes a harmonized international framework for valid…
Overview EN ISO 14644-14:2026 is a European and International Standard developed by CEN and ISO for the assessment of equipment suitability in cleanrooms and controlled environments based on airborne…
Overview EN ISO 14644-13:2026 provides comprehensive guidelines for cleaning surfaces within cleanrooms and associated controlled environments. Developed by the European Committee for Standardization…
Overview EN ISO 14890:2026 – Conveyor belts – Specification for rubber- or plastics-covered conveyor belts of textile construction for general use sets out the requirements for conveyor belts with te…
Overview EN ISO 14019-4:2026 specifies the principles and requirements for bodies that validate and verify declared sustainability information. Developed jointly by CEN and ISO, this standard serves…
Overview EN ISO 14019-2:2026, titled Sustainability information - Part 2: Principles and requirements for verification processes, is a European and international standard developed by CEN and ISO. Th…
Overview EN ISO 14019-1:2026, Sustainability information - Part 1: General principles and requirements for validation and verification, establishes a harmonized international framework for validating…
Overview EN ISO 14577-5:2026 establishes the methodology for performing linear elastic dynamic instrumented indentation testing (DIIT) to determine the indentation hardness and modulus of metallic ma…
Overview EN ISO 14245:2021/A1:2025 - Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing (Amendment 1) - is a CEN-adopted amendment to ISO 14245:2021 that updates technic…
