Search

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitt…

Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusio…

Open end blind rivets with break pull mandrel and protruding head. Cu/St or Cu/Br or Cu/SSt.

Indoor air. Determination of the emission of volatile organic compounds from building products and furnishing…

Steel wire ropes. Determination of the transverse rigidity of steel wire ropes under no axial load condition.

Heavy duty engines. Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using…

Building environment design. Indoor air quality. Methods of expressing the quality of indoor air for human oc…

Paints and varnishes. Evaluation of sag resistance.

Indoor air. Sampling strategy for formaldehyde.

Indoor air - Determination of the emission of volatile organic compounds from building products and furnishin…

Machine tools. Safety. Stationary grinding machines

1 Scope This International Standard specifies the requirements and/or measures to eliminate the hazards or reduce the risks in the following groups of stationary grinding machines which are designed…

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with f…

1 Scope This document specifies the general properties of unplasticized polyamide (PA-U) compounds for the manufacture of pipes, fittings and valves made from these compounds , intended to be buried…

Plastics. Determination of the viscosity of polymers in dilute solution using capillary viscometers - Poly(vi…

Tools for pressing. Guide plates. U- and V-blocks

1 Scope This International Standard specifies the main dimensions and tolerances of guiding plates, U- and V-blocks, to be used in press tools. It also specifies the designation of U- and V-blocks.

In situ test methods for high efficiency filter systems in industrial facilities

Overview - what ISO 16170:2016 covers ISO 16170:2016 specifies standardized in situ test methods for high efficiency particulate air (HEPA) and ultra-low penetration air (ULPA) filter systems install…

Corrosion of metals and alloys — Guidelines for galvanic corrosion control

Overview ISO 16364:2026, Corrosion of metals and alloys - Guidelines for galvanic corrosion control, is an international standard published by ISO. It provides authoritative methods and guidelines fo…

Metallic materials — Sheet and strip — Hole expanding test

Overview ISO 16630:2026 – Metallic materials - Sheet and strip - Hole expanding test is an international standard published by ISO (International Organization for Standardization). It specifies a rel…

Automation systems and integration — Equipment behaviour catalogues for virtual production systems — Part 5:…

Overview ISO 16400-5:2026 is an international standard published by the International Organization for Standardization (ISO). Titled "Automation systems and integration - Equipment behaviour catalogu…

Building automation and control systems (BACS) - Part 6: Data communication conformance testing (ISO 16484-6:…

Overview EN ISO 16484-6:2026 is a European and International standard developed by CEN and ISO for Building Automation and Control Systems (BACS), focusing specifically on Part 6: Data Communication…

Natural gas fuelling stations - Liquefied natural gas (LNG) stations for fuelling road vehicles (ISO 16924:20…

Overview SIST EN ISO 16924:2026 specifies comprehensive requirements for the design, construction, operation, maintenance, and inspection of natural gas fuelling stations that dispense liquefied natu…

Natural gas fuelling stations - Compressed natural gas (CNG) stations for fuelling vehicles (ISO 16923:2026)

Overview SIST EN ISO 16923:2026 is a comprehensive international standard specifying the requirements for the design, construction, operation, maintenance, and inspection of compressed natural gas (C…

Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO…

Overview SIST EN ISO 16610-22:2026 is an international standard developed by CEN, focusing on Geometrical Product Specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters.…

Health informatics - Requirements for international machine-readable coding of medicinal product package iden…

Overview EN ISO 16791:2026 - Health informatics - Requirements for international machine-readable coding of medicinal product package identifiers is a critical international standard developed by CEN…

Geometrical product specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters (ISO…

Overview EN ISO 16610-22:2026 is an international standard developed by CEN, focusing on Geometrical Product Specifications (GPS) - Filtration - Part 22: Linear profile filters: Spline filters. This…

Cosmetics - Guidelines on technical definitions and criteria for natural and organic cosmetic ingredients - P…

Overview SIST ISO 16128-2:2017/Amd 1:2026 is an international amendment that provides updated guidelines on technical definitions and criteria for natural and organic cosmetic ingredients and product…

Environmental solid matrices - Determination of elements using inductively coupled plasma mass spectrometry (…

Overview SIST EN ISO 16965:2026 addresses the standardized determination of elements in environmental solid matrices using inductively coupled plasma mass spectrometry (ICP-MS). Developed by SIST in…

Milk, milk products, infant formula and adult nutritionals - Determination of fatty acids composition - Capil…

Overview SIST EN ISO 16958:2026 specifies a standardized method for determining the composition of fatty acids in milk, milk products, infant formula, and adult nutritional formulas. Prepared by CEN…

Milk, milk products, infant formula and adult nutritionals - Determination of fatty acids composition - Capil…

Overview EN ISO 16958:2026 specifies a standardized method for determining the composition of fatty acids in milk, milk products, infant formula, and adult nutritional formulas. Prepared by CEN and a…

Natural gas fuelling stations - Liquefied natural gas (LNG) stations for fuelling road vehicles (ISO 16924:20…

Overview EN ISO 16924:2026 specifies comprehensive requirements for the design, construction, operation, maintenance, and inspection of natural gas fuelling stations that dispense liquefied natural g…

Natural gas fuelling stations - Compressed natural gas (CNG) stations for fuelling vehicles (ISO 16923:2026)

Overview EN ISO 16923:2026 is a comprehensive international standard specifying the requirements for the design, construction, operation, maintenance, and inspection of compressed natural gas (CNG) f…

Data structures for electronic product catalogues for building services - Part 5: Product catalogue exchange…

Overview SIST EN ISO 16757-5:2026 defines standardized data structures and an exchange format for electronic product catalogues used in building services. Developed by SIST, this standard ensures tha…

Data structures for electronic product catalogues for building services - Part 4: Data Dictionary structures…

Overview EN ISO 16757-4:2025 - Data structures for electronic product catalogues for building services - Part 4: Data Dictionary structures for product catalogues defines the requirements for data di…

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with…

Overview SIST EN ISO 16486-4:2025/A11:2025 is an amendment to the European Standard for plastics piping systems, specifically focusing on unplasticized polyamide (PA-U) piping systems intended for th…

Water quality - Analysis of microplastic in water - Part 2: Vibrational spectroscopy methods for waters with…

Overview EN ISO 16094-2:2025 - "Water quality - Analysis of microplastic in water - Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water"…

Fusion installations - Criteria for the design and operation of confinement and ventilation systems of tritiu…

Overview EN ISO 16646:2025 (ISO 16646:2024) provides criteria for the design and operation of confinement and ventilation systems in tritium fusion facilities and fusion fuel handling facilities. It…

Data structures for electronic product catalogues for building services - Part 5: Product catalogue exchange…

Overview - EN ISO 16757-5:2025 (ISO 16757-5:2025) EN ISO 16757-5:2025 specifies a product catalogue exchange format for building services product data. It defines how manufacturers exchange electroni…

Data structures for electronic product catalogues for building services - Part 4: Data Dictionary structures…

Overview EN ISO 16757-4:2025 - Data structures for electronic product catalogues for building services - Part 4: Data Dictionary structures for product catalogues defines the requirements for data di…

Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (…

Overview EN ISO 16122-4:2025 - "Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2024)" - defines requirements and test methods…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 1…

Overview EN ISO 16122-2:2025 - "Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2024)" - specifies requirements and test methods fo…

Welding consumables - Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength…

Overview EN ISO 16834:2025 is the CEN-endorsed classification standard for welding consumables used in gas shielded arc welding of high‑strength steels. It covers wire electrodes, welding wires, rods…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2024, incl…

Overview EN ISO 16122-1:2025 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2024, corrected version 2025-05) defines the general requirements for…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crop…

Overview EN ISO 16122-3:2025 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2024) specifies requirements and test method…

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with…

Overview EN ISO 16486-4:2025/A11:2025 is an amendment to the European Standard for plastics piping systems, specifically focusing on unplasticized polyamide (PA-U) piping systems intended for the sup…

Building automation and control systems (BACS) - Part 4: Control applications (ISO 16484-4:2025)

Overview SIST EN ISO 16484-4:2025 - Building automation and control systems (BACS) Part 4: Control applications defines standardised control applications and function blocks used in building automati…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 1…

Overview EN ISO 16122-2:2025 - "Agricultural and forestry machinery - Inspection of sprayers in use - Part 2: Horizontal boom sprayers (ISO 16122-2:2024)" - specifies requirements and test methods fo…

Water quality - Analysis of microplastic in water - Part 2: Vibrational spectroscopy methods for waters with…

Overview EN ISO 16094-2:2025 - "Water quality - Analysis of microplastic in water - Part 2: Vibrational spectroscopy methods for waters with low content of suspended solids including drinking water"…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crop…

Overview EN ISO 16122-3:2025 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 3: Sprayers for bush and tree crops (ISO 16122-3:2024) specifies requirements and test method…

Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2024, incl…

Overview EN ISO 16122-1:2025 - Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General (ISO 16122-1:2024, corrected version 2025-05) defines the general requirements for…

Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (…

Overview EN ISO 16122-4:2025 - "Agricultural and forestry machines - Inspection of sprayers in use - Part 4: Fixed and semi-mobile sprayers (ISO 16122-4:2024)" - defines requirements and test methods…

Microbiology of the food chain - Method validation - Part 3: Protocol for the verification of reference metho…

Overview EN ISO 16140-3:2021/A1:2025 (CEN endorsement of ISO 16140-3:2021 Amendment 1) updates the single-laboratory verification protocol within the ISO 16140 series to include verified identificati…

Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO 16671:2025)

Overview EN ISO 16671:2025 - Ophthalmic implants: Irrigating solutions for ophthalmic surgery defines safety and performance requirements for ophthalmic irrigating solutions (OIS) used during eye sur…

Corrosion of metals and alloys - Corrosion in artificial atmosphere - Accelerated corrosion test involving ex…

Overview EN ISO 16701:2025 (ISO 16701:2025) defines an accelerated laboratory corrosion test for metals and coatings that combines humidity cycling with intermittent spraying of a salt solution. The…

Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single labor…

Overview SIST EN ISO 16140-4:2020/A2:2025 is an amendment to an established international standard for microbiology of the food chain, focusing on the validation of identification methods for microor…

Fusion installations - Criteria for the design and operation of confinement and ventilation systems of tritiu…

Overview EN ISO 16646:2025 (ISO 16646:2024) provides criteria for the design and operation of confinement and ventilation systems in tritium fusion facilities and fusion fuel handling facilities. It…

Environmental solid matrices - Determination of elements using inductively coupled plasma mass spectrometry (…

Overview EN ISO 16965:2025 - Environmental solid matrices: Determination of elements using ICP‑MS specifies a validated laboratory method for quantifying a wide range of elements in digests of soil,…

Nuclear energy - Determination of Gd2O3 content in pellets containing uranium oxide by X-ray fluorescence spe…

Overview EN ISO 16795:2025 (adopted from ISO 16795:2024) specifies a validated method for the determination of Gd2O3 (gadolinium oxide) mass fraction in UO2 fuel pellets by X‑ray fluorescence spectro…

Non-destructive testing - Ultrasonic thickness determination (ISO 16809:2025)

Overview EN ISO 16809:2025 / ISO 16809:2025 - "Non‑destructive testing - Ultrasonic thickness determination" - defines principles for measuring the thickness of metallic and non‑metallic materials us…

Non-destructive testing - Ultrasonic testing - Time-of-flight diffraction technique for detection and sizing…

Overview - EN ISO 16828:2025 (TOFD, ultrasonic testing) EN ISO 16828:2025 defines the general principles and minimum requirements for using the time‑of‑flight diffraction (TOFD) technique in ultrason…

Non-destructive testing - Ultrasonic testing - Characterization and sizing of discontinuities (ISO 16827:2025)

Overview EN ISO 16827:2025 - Non-destructive testing: Ultrasonic testing - Characterization and sizing of discontinuities defines principles and techniques for characterizing and sizing previously de…

Building automation and control systems (BACS) - Part 4: Control applications (ISO 16484-4:2025)

Overview EN ISO 16484-4:2025 - Building automation and control systems (BACS) Part 4: Control applications defines standardised control applications and function blocks used in building automation. T…