High-voltage switchgear and controlgear - Voltage detecting and indicating system
High-voltage switchgear and controlgear - Voltage detecting and indicating system
This site uses cookies and visit counters for operation and statistics. Privacy policy
1 Scope This part of IEC 62271 is applicable to the voltage detecting and indicating system ( VDIS ) to be installed on indoor and outdoor high-voltage equipment . The VDIS as defined by this document includes a coupling system per phase (capacitive, resistive coupling or other technology) to connect to live parts ( main circuit ). The VDIS is applicable on systems with nominal voltage s above 1 kV and service frequencies from 16,7 Hz up to and including 60 Hz. The VDIS is used to detect and indicate the presence or absence of operating voltage . It is not intended to distinguish between voltage not present (i.e. U < 10 % of nominal voltage ) and dead circuit state (i.e. U = 0 V).
NOTE 1 The use of a specific means of connection to earth of the main circuit (e.g. by an earthing switch) provides the "dead circuit" ( U = 0 V) state.
NOTE 2 The VDIS has the same threshold values as the voltage presence indicating system (VPIS) (IEC 62271‑206) and the voltage detecting system (VDS) (IEC 61243‑5) for not indicating presence of voltage and for detecting an absence of operating voltage , respectively.
T...
Standards mentioned in the description
