BS EN ISO 10360-5:2010 PDF

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using single and multiple stylus contacting probing systems

First page of standard BS EN ISO 10360-5:2010

Open preview (PDF)

Title (English):

BS EN ISO 10360-5:2010

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM) - CMMs using single and multiple stylus contacting probing systems

Document status:: Withdrawn
Format:: Electronic (PDF)
Publication date:: November 30, 2010
ICS:: 17.040.30
Technical committee:: CEN
SKU:: BS EN ISO 10360-5:2010

Delivery type:

Full version50 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:50 €

Abstract

1 Scope This part of ISO 10360 specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using

— any type of contacting probing system,

— a discrete point probing mode, and

— spherical or hemispherical stylus tip(s).

It complements ISO 10360-7, which is the module for CMMs with video probing systems, and ISO 10360-2, which is universal, i.e. not probe-type specific.

NOTE It is the CMM probing performance tests which are specified by the maximum permissible errors (MPEs), due to the impracticality of isolating the performance of the probing system from that of the CMM, even on a small artefact such as a test sphere.

This part of ISO 10360 applies to CMMs supplied with any of the following:

a) single-stylus probing system;

b) multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. “star” stylus);

c) multiple probing systems such as those with a stylus for each of their ...

Related standards

Standards mentioned in the description

1 Scope This part of ISO 10360 specifies acceptance and periodic reverification tests of CMM performance with contacting probing systems and is only applicable to CMMs using

— any type of contacting probing system,

— a discrete point probing mode, and

— spherical or hemispherical stylus tip(s).

It complements ISO 10360-7, which is the module for CMMs with video probing systems, and ISO 10360-2, which is universal, i.e. not probe-type specific.

This part of ISO 10360 applies to CMMs supplied with any of the following:

a) single-stylus probing system;

b) multi-stylus probing systems with fixed multiple styli attached to a single probe (e.g. “star” stylus);

c) multiple probing systems such as those with a stylus for each of their ...

BS EN ISO 10360-5:2010 PDF

Abstract

Related standards

Abstract

Related standards

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring syste…

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machi…

Geometrical product specifications (GPS) - Acceptance and reverification tests for coordinate measuring machi…