1 Scope
This document specifies methods for measuring the sound pressure level from service equipment in buildings installed to building structures. This document
covers specifically measurements of sanitary installations, mechanical ventilation,
heating and cooling service equipment, lifts, rubbish chutes, boilers, blowers, pumps
and other auxiliary service equipment, and motor driven car park doors, but can also
be applied to other equipment attached to or installed in buildings.
The methods are suitable for rooms with volumes of approximately 300 m 3 or less in e.g. dwellings, hotels, schools, offices and hospitals. The standard is
not in general intended for measurements in large auditoria and concert halls. However,
the operating conditions and operating cycles in Annex B can be used in such cases.
The service equipment sound pressure level is determined as the maximum A - weighted and optionally C - weighted sound pressure level occurring during a specified operation cycle of the service equipment under test,
or as the equivalent continuous sound pressure level determined with a specified integration time. A -weighted and C - weighted values are calculated from octave-band measurements.
Open preview (PDF)Acoustics. Measurement of sound pressure level from service equipment in buildings. Engineering method