Water quality. Examination and determination of colour
Water quality. Examination and determination of colour
This site uses cookies and visit counters for operation and statistics. Privacy policy
1 Scope This International Standard specifies four different methods, designated A to D, for the examination of colour. The previously most employed method for assessment of water colour in water treatment plants, limnological surveys, etc. was based on the hexachloroplatinate scale (Reference [1]). Methods C and D are harmonized with this traditional procedure (References [2][3]). Method A involves examination of apparent colour by visually observing a water sample in a bottle. This gives only preliminary information, for example for use in field work. Only the apparent colour can be reported. Method B involves determination of the true colour of a water sample using optical apparatus and is applicable to raw and potable water and to industrial water of low colour. A subclause on interferences is included. Method C involves determination of the true colour of a water sample using optical apparatus for comparison with hexachloroplatinate concentration at wavelength, λ = 410 nm. A subclause on interferences is included. Method D involves determination of colour by visual comparison with hexachloroplatinate standard solutions and can be applied to raw and drinking water. A subclause on interferences is included. Methods A and B are appropriate if the colour hue of the sample differs from the hue of the matching solution.
NOTE 1 Under certain circumstances, strongly coloured water samples require dilution before examination or determination. However, this can alter the physical-chemical conditions leading to a change in colour.
Other BS standards
