BS ISO 12003-2:2008 PDF

Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors - Rear-mounted ROPS

First page of standard BS ISO 12003-2:2008

Open preview (PDF)

Title (English):

BS ISO 12003-2:2008

Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors - Rear-mounted ROPS

Document status:: Withdrawn
Format:: Electronic (PDF)
Publication date:: January 31, 2009
ICS:: 65.060.10
SKU:: BS ISO 12003-2:2008

Delivery type:

Full version50 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:50 €

Abstract

1 Scope This part of ISO 12003 specifies procedures for both the static and dynamic testing of roll-over protective structures ( ROPS ) rear-mounted on narrow-track wheeled agricultural and forestry tractors. It defines the clearance zone and acceptance conditions for rigid or tiltable, rear, two-post roll bar, frame and cab ROPS , and is applicable to tractors so equipped having the following characteristics.

— A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).

— A fixed or adjustable minimum track width of one of the two axles of less than 1 150 mm when fitted with the widest specified tyres, and with the overall width of the other axle being less than that of the first axle.

— A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

Related standards

Mentioned in the description and other BS standards

— A ground clearance of not more than 600 mm beneath the lowest points of the front- and rear-axle housings (not considering lower points on the axle differential).

— A mass greater than 600 kg but less than 3 000 kg, unladen, including the ROPS and tyres of the largest size recommended by the manufacturer.

BS ISO 12003-2:2008 PDF

Abstract

Related standards

Abstract

Related standards

Agricultural and forestry tractors — Narrow-track wheeled tractors — Part 2: Rear-mounted roll-over protectiv…

Safety of earth-moving machinery - Specification for lighting, signalling and marking lights, and reflex-refl…

Airframe rolling bearings. Technical specification.

Road vehicles. Types. Terms and definitions.

Water quality. Evaluation of the ´ultimate´ anaerobic biodegradability of organic compounds in digested sludg…

Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. Hoisting equipme…

Specification for lifts, escalators, passenger conveyors and paternosters. Building construction requirements.

Timber structures. Test methods. Cyclic testing of joints made with mechanical fasteners.