EN ISO 19893:2018 PDF

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)

Title (English):

EN ISO 19893:2018

Plastics piping systems - Thermoplastics pipes and fittings for hot and cold water - Test method for the resistance of mounted assemblies to temperature cycling (ISO 19893:2011)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 14
Publication date:: September 26, 2018
Edition:: CEN EN 19893 edition 2 version 1
ICS:: 23.040.20

Document language:

enru

Delivery time:1–7 days

Price:60 €

Description (English):

ISO 19893:2011 specifies a method for testing the resistance to temperature cycling of joints for piping systems with rigid or flexible thermoplastics pipes. It is applicable to thermoplastics piping systems intended to be used in hot and cold water pressure applications.

Technical details

Technical committee: CEN/TC 155 - Plastics piping systems and ducting systems
SKU: EN ISO 19893:2018

Abstract

Overview

EN ISO 19893:2018 (ISO 19893:2011) defines a standardized test method for the resistance of mounted assemblies to temperature cycling in thermoplastics piping systems for hot and cold water. It applies to rigid and flexible thermoplastics pipes and fittings used in pressurized hot and cold water applications and is intended to verify joint and assembly performance under repeated thermal stress.

Key topics and technical requirements

Scope: Test method for joints and mounted assemblies in thermoplastics piping systems intended for hot and cold water pressure service.
Test principle: A piping assembly is subjected to alternating hot and cold water cycles under pressure while parts of the assembly are held under tensile stress and/or flexural strain. Assemblies are monitored for leakage and mechanical failure.
Test assembly configuration: Typical arrangement includes three branches (A anchored and prestressed, B free to expand, C bent section). Bending radius default: 6 × nominal diameter (6d) unless otherwise specified.
Apparatus requirements:
- Cold and hot water sources with temperature accuracy ±2 °C.
- Alternation equipment capable of changing inlet temperature within 1 minute.
- Balancing valves to control velocity/temperature drop.
- Pressure gauges and regulator with accuracy ±0.5 bar (±0.05 MPa).
- Tensioning device to apply prescribed tensile stress and supporting brackets for fixed and sliding supports.
- Thermometers to verify inlet/outlet temperatures.
Cycle parameters:
- Default for diameters

Related standards

Mentioned in the description and other EN standards

Overview

Key topics and technical requirements

Scope: Test method for joints and mounted assemblies in thermoplastics piping systems intended for hot and cold water pressure service.
Test principle: A piping assembly is subjected to alternating hot and cold water cycles under pressure while parts of the assembly are held under tensile stress and/or flexural strain. Assemblies are monitored for leakage and mechanical failure.
Test assembly configuration: Typical arrangement includes three branches (A anchored and prestressed, B free to expand, C bent section). Bending radius default: 6 × nominal diameter (6d) unless otherwise specified.
Apparatus requirements:
- Cold and hot water sources with temperature accuracy ±2 °C.
- Alternation equipment capable of changing inlet temperature within 1 minute.
- Balancing valves to control velocity/temperature drop.
- Pressure gauges and regulator with accuracy ±0.5 bar (±0.05 MPa).
- Tensioning device to apply prescribed tensile stress and supporting brackets for fixed and sliding supports.
- Thermometers to verify inlet/outlet temperatures.
Cycle parameters:
- Default for diameters

EN ISO 19893:2018 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Related standards

Abstract

Overview

Key topics and technical requirements

Related standards

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resi…

Packaging - Conditioning for testing - Part 1: Paper sacks (ISO 6599-1:2026)

Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2026)

Information security, cybersecurity and privacy protection - Controls, requirements, and guidance for persona…

Dentistry - Compatibility testing for metal-ceramic and ceramic-ceramic systems (ISO 9693:2026)

Leather - Physical and mechanical test methods for the determination of soiling - Part 1: Rubbing (Martindale…

Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomen…

Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2026)