EN ISO 8734:1997 PDF

Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)

Title (English):

EN ISO 8734:1997

Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 6
Publication date:: November 15, 1997
Edition:: CEN EN 8734 edition 2 version 1
ICS:: 21.060

Document language:

enru

Delivery time:1–7 days

Price:44 €

Description (English):

La présente Norme internationale prescrit les caractéristiques des goupilles cylindriques trempées à coeur ou cémentées et en acier inoxydable martensitique de diamètre nominal, d, de 1 mm à 20 mm inclus.

Technical details

Technical committee: CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
SKU: EN ISO 8734:1997

Abstract

Overview

EN ISO 8734:1997 specifies the characteristics of parallel pins (dowel pins) manufactured from through-hardened or case-hardened steel and from martensitic stainless steel. The standard covers nominal diameters from 1 mm to 20 mm inclusive, dimensional tolerances, material requirements, surface condition and acceptance inspection references. It is widely used in mechanical assembly, tooling and precision engineering where reliable location and shear resistance are required.

Key Topics

Scope and sizes: Nominal diameters d = 1–20 mm (inclusive). Commercial lengths and nominal length ranges are defined in the standard (see figure/table references in ISO 8734).
Material types: Through-hardened steel, case-hardened steel (Type A/Type B), and martensitic stainless steel (grade C1 per ISO 3506-1) are specified as acceptable materials.
Surface and finish: Pins are normally supplied plain (natural finish) with a protective lubricant unless otherwise agreed. Surface roughness is controlled (R

Related standards

Standards mentioned in the description

Overview

Key Topics

Scope and sizes: Nominal diameters d = 1–20 mm (inclusive). Commercial lengths and nominal length ranges are defined in the standard (see figure/table references in ISO 8734).
Material types: Through-hardened steel, case-hardened steel (Type A/Type B), and martensitic stainless steel (grade C1 per ISO 3506-1) are specified as acceptable materials.
Surface and finish: Pins are normally supplied plain (natural finish) with a protective lubricant unless otherwise agreed. Surface roughness is controlled (R

EN ISO 8734:1997 PDF

Technical details

Abstract

Overview

Key Topics

Related standards

Abstract

Overview

Key Topics

Related standards

Parallel pins, of hardened steel and martensitic stainless steel (Dowel pins)

Parallel pins, or hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997)

Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws an…