Overview

IEC 60384-13:2020 is an internationally recognized standard developed by the International Electrotechnical Commission (IEC) that specifies the sectional requirements for fixed polypropylene film dielectric metal foil direct current (DC) capacitors used in electronic equipment. This standard defines preferred ratings, characteristics, and quality assessment procedures, including essential tests and measurement methods to ensure reliable capacitor performance.

This edition aligns with the latest ISO/IEC Directives and harmonizes the document structure with other related IEC standards. IEC 60384-13 specifically excludes capacitors designed for electromagnetic interference suppression, which are covered under IEC 60384-14. It provides clear guidelines on minimum performance levels, ensuring that capacitors meeting this standard demonstrate high quality and durability suitable for electronic applications.

Key Topics

Scope and Application: Covers fixed DC capacitors with polypropylene film dielectric and metal foil electrodes intended for use in electronic devices.
Preferred Ratings and Characteristics: Specifies nominal capacitance, tolerance, rated voltage, category voltage, temperature stability classes, and climatic categories.
Test Procedures:
- Visual inspections and dimensional checks to verify physical quality.
- Electrical tests such as voltage proof, capacitance measurement, tangent of loss angle (tan δ), insulation resistance, and temperature-dependent characteristics.
- Mechanical and environmental tests including resistance to soldering heat, solderability, vibration, shock, rapid temperature changes, damp heat, endurance, and solvent resistance.
Marking Requirements: Clear guidelines on the marking of capacitors and packaging to ensure traceability and proper identification.
Quality Assessment: Procedures for production stages, including certification and structural similarity considerations, to maintain manufacturing consistency and product reliability.

Applications

IEC 60384-13:2020 fixed polypropylene film dielectric metal foil capacitors are commonly applied in:

Electronic Equipment: Used in circuits requiring stable capacitance values and low loss at DC conditions.
Power Electronics: Ideal for DC link circuits in power supplies, converters, and inverters where reliable DC capacitor performance is essential.
Signal Processing: Applied in filtering and timing circuits that require precise capacitance with minimal variation over temperature.
Industrial and Consumer Electronics: Used in devices where high insulation resistance and mechanical robustness are critical.
Automotive Electronics: Suitable for DC filtering and stabilization in harsh environments due to their performance under temperature, vibration, and shock stresses.

Related Standards

IEC 60384-1:2016 – General requirements and definitions for fixed capacitors used in electronic equipment.
IEC 60384-14 – Sectional specification for fixed capacitors used for electromagnetic interference suppression.
ISO/IEC Directives, Part 2:2018 – Provides guidelines on the preparation of IEC standards.
Other Sectional Specifications in IEC 60384 series – Cover different capacitor types and dielectric materials, establishing performance and test requisites for specific applications.

By adhering to IEC 60384-13:2020, manufacturers and users of fixed polypropylene film dielectric metal foil DC capacitors can ensure product quality, reliability, and safety in electronic systems, thereby supporting the development of durable and efficient electronic equipment worldwide.

Overview

Key Topics

Scope and Application: Covers fixed DC capacitors with polypropylene film dielectric and metal foil electrodes intended for use in electronic devices.
Preferred Ratings and Characteristics: Specifies nominal capacitance, tolerance, rated voltage, category voltage, temperature stability classes, and climatic categories.
Test Procedures:
- Visual inspections and dimensional checks to verify physical quality.
- Electrical tests such as voltage proof, capacitance measurement, tangent of loss angle (tan δ), insulation resistance, and temperature-dependent characteristics.
- Mechanical and environmental tests including resistance to soldering heat, solderability, vibration, shock, rapid temperature changes, damp heat, endurance, and solvent resistance.
Marking Requirements: Clear guidelines on the marking of capacitors and packaging to ensure traceability and proper identification.
Quality Assessment: Procedures for production stages, including certification and structural similarity considerations, to maintain manufacturing consistency and product reliability.

Applications

IEC 60384-13:2020 fixed polypropylene film dielectric metal foil capacitors are commonly applied in:

Electronic Equipment: Used in circuits requiring stable capacitance values and low loss at DC conditions.
Power Electronics: Ideal for DC link circuits in power supplies, converters, and inverters where reliable DC capacitor performance is essential.
Signal Processing: Applied in filtering and timing circuits that require precise capacitance with minimal variation over temperature.
Industrial and Consumer Electronics: Used in devices where high insulation resistance and mechanical robustness are critical.
Automotive Electronics: Suitable for DC filtering and stabilization in harsh environments due to their performance under temperature, vibration, and shock stresses.

Related Standards

IEC 60384-1:2016 – General requirements and definitions for fixed capacitors used in electronic equipment.
IEC 60384-14 – Sectional specification for fixed capacitors used for electromagnetic interference suppression.
ISO/IEC Directives, Part 2:2018 – Provides guidelines on the preparation of IEC standards.
Other Sectional Specifications in IEC 60384 series – Cover different capacitor types and dielectric materials, establishing performance and test requisites for specific applications.

IEC 60384-13:2020 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Fixed capacitors for use in electronic equipment - Part 1: Generic specification

Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors f…

Fixed capacitors for use in electronic equipment - Part 6-1: Blank detail specification: Fixed metallized pol…