Overview
IEC 60695-6-2:2011 is an international standard published by the International Electrotechnical Commission (IEC) focusing on fire hazard testing specifically related to smoke obscuration. This standard provides a comprehensive summary of existing test methods used to assess the obscuration caused by smoke generated in fires. It evaluates both static and dynamic test methods currently in use within international, national, and industry standards. Importantly, IEC 60695-6-2:2011 offers insights into the relevance of these methods in the context of electrotechnical products, their materials, and relevant fire scenarios. This standard supersedes the IEC/TS 60695-6-2:2005 and introduces updated terminology, references, and new test methods.
Key Topics
-
Smoke Obscuration Testing
The standard summarizes various test methodologies that measure smoke obscuration levels during fire hazard evaluations. These methods are categorized into:
- Static test methods: Measuring smoke density or opacity under controlled, non-flowing conditions.
- Dynamic test methods: Assessing smoke generation in conditions where materials or products are exposed to evolving fire scenarios, often involving airflow.
-
Test Methods Overview
The standard provides detailed descriptions of several test methods, including but not limited to:
- Testing in small smoke chambers (0.51 m or larger)
- Measurements of specific optical densities using dual-chamber apparatuses
- Cable smoke generation tests with samples mounted on horizontal and vertical ladders
- Cone calorimeter smoke density determination
-
Relevance to Electrotechnical Products
Special attention is given to how smoke obscuration tests apply to electrical and electronic equipment, where materials and fire behavior can differ significantly from other sectors. This ensures that smoke hazard assessments accurately reflect risks associated with electrotechnical materials.
-
Technical Revisions
Key updates to the 2011 edition include:
- Upgraded normative references
- New terms and definitions
- Introduction of a new test method detailed in Clause 7.3.2
- Editorial improvements enhancing clarity and technical accuracy
Applications
IEC 60695-6-2:2011 serves as a crucial guideline for manufacturers, testing laboratories, regulatory bodies, and safety assessors involved in fire safety of electrical and electronic products. Practical applications include:
-
Design and Material Selection
Helping engineers select materials that minimize smoke generation and improve safety during fires.
-
Fire Safety Testing
Providing standardized smoke obscuration test methods for quality control and certification of electrotechnical products.
-
Risk Assessment
Enabling evaluation of smoke-related hazards in fire scenarios, supporting the development of fire mitigation strategies.
-
Compliance
Assisting manufacturers in meeting international safety standards focused on smoke hazards, which is essential for global market access.
Related Standards
IEC 60695-6-2:2011 is part of the broader IEC 60695 series, which covers various aspects of fire hazard testing:
- IEC 60695-6-1:2005 – Smoke obscuration general guidance, designed to be used in conjunction with IEC 60695-6-2.
- IEC 60695-6-30 & IEC 60695-6-31 – Focusing on small-scale static tests for smoke opacity and materials respectively.
Additionally, this standard aligns with guidelines from IEC Guide 104 and ISO/IEC Guide 51, emphasizing its status as a basic safety publication and supporting international consensus in safety testing protocols.
By adopting IEC 60695-6-2:2011, stakeholders ensure a globally harmonized approach to measuring and interpreting smoke obscuration - a critical factor in fire hazard evaluation of electrotechnical products. This improves fire safety outcomes and enhances the protection of life and property worldwide.
Open preview (PDF)Fire hazard testing - Part 6-2: Smoke obscuration - Summary and relevance of test methods
