Overview
IEC 60793-1-51:2014 is an international standard published by the International Electrotechnical Commission (IEC) that specifies measurement methods and test procedures for evaluating the performance of optical fibres under dry heat (steady state) conditions. This standard focuses on assessing the durability and suitability of specific optical fibre sub-categories-A1a to A1d multimode fibres and class B and C single-mode fibres-when exposed to high temperatures typically encountered in use, storage, and transport environments.
The primary purpose of the test outlined in this standard is to observe the effects of prolonged dry heat exposure (+85 °C for 30 days) on fibre attenuation and overall performance. The methodology follows the environmental testing framework established in IEC 60068-2-2 (Test Bd) with specific adaptations relevant to optical fibres.
Key Topics
-
Scope of Application:
IEC 60793-1-51:2014 applies to optical fibre sub-categories A1a to A1d multimode fibres, and class B and class C single-mode fibres. While primarily designed for these categories, further studies are suggested for other fibre types.
-
Test Conditions:
- Temperature: +85 °C dry heat exposure
- Duration: 30 days
- Humidity: Uncontrolled but recommended minimum 50% relative humidity at test start
- Heating and cooling rates: ≤ 1 °C/min average over any 5 min period to ensure controlled thermal stress
-
Specimen Preparation:
Specimens must have a minimum length of 1,000 m for multimode fibres and 2,000 m for single-mode fibres. Fibres should be loosely coiled with a minimum bend diameter of 150 mm to avoid macrobend-induced losses. Use of dusting powder such as talcum is recommended to prevent coil friction.
-
Measurement Methods:
Attenuation is measured before, during (once thermal equilibrium is reached), and after conditioning using IEC 60793-1-40 compliant techniques, including insertion loss and backscattering methods. Additional optical or mechanical property testing may be specified based on detailed product specifications.
-
Pass/Fail Criteria:
Specific pass/fail criteria are determined by comparative analysis of attenuation and mechanical data collected pre- and post-exposure.
-
Recovery Phase:
After thermal conditioning, fibres undergo a recovery period at standard atmospheric conditions for between 12 and 48 hours to monitor any recovery or permanent changes in performance.
Applications
This standard is essential for manufacturers, system designers, and testing laboratories involved in:
-
Optical Fibre Quality Assurance:
Ensuring fibre products meet performance requirements under extreme temperature conditions relevant to intended uses.
-
Environmental Durability Assessment:
Verifying fibre resilience during long-term exposure to heat encountered in outdoor installations, storage, and transportation scenarios.
-
Product Specification Compliance:
Supporting conformity with sectional specifications for various optical fibre classes as outlined in IEC 60793 series, particularly for fibres used in telecommunications, data centers, and industrial applications.
-
Research and Development:
Providing a standardized test method for evaluating new fibre compositions or coatings against thermal aging effects.
Related Standards
-
IEC 60068-2-2: Environmental testing – Test B: Dry heat, the foundational standard for performing steady-state dry heat conditioning.
-
IEC 60793-1-40: Optical fibres – Attenuation measurement methods, detailing procedures to quantify fibre attenuation accurately.
-
IEC 60793-2-10: Sectional specification for category A1 multimode fibres, defining detailed product requirements.
-
IEC 60793-2-50: Sectional specification for class B single-mode fibres, specifying characteristics and acceptable performance.
-
IEC 60793-2-60: Sectional specification for class C single-mode intraconnection fibres, extending fibre type coverage.
Summary
IEC 60793-1-51:2014 provides a rigorously designed and internationally recognized procedure for testing the high temperature endurance of critical optical fibre types. By harmonizing with related sectional fibre specifications and environmental testing standards, it enables consistent and reliable performance evaluation. Adoption of this standard helps ensure optical fibres maintain integrity and performance through demanding thermal conditions encountered in real-world deployment, supporting robust optical communication infrastructure worldwide.
Keywords: optical fibre, dry heat test, steady state temperature test, high temperature exposure, multimode fibre, single-mode fibre, optical attenuation measurement, IEC standard, fibre durability, fibre testing procedure.
Open preview (PDF)Optical fibres - Part 1-51: Measurement methods and test procedures - Dry heat (steady state) tests
