Overview
IEC 60794-3-40:2008 is an international family specification within the IEC 60794 series for optical fibre cables and conduits intended for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers. Published as Edition 1.0 (2008), this standard defines minimum construction features, performance expectations and test requirements for sewer cables and conduits used in outdoor telecom networks. It is intended to be read together with IEC 60794-1-1, IEC 60794-1-2 and IEC 60794-3 and complements sectional specifications under IEC 60794-3.
Key Topics
The standard addresses technical and practical aspects including:
- Cable and conduit construction: general construction rules, conduit types and specific sewer cable designs (for conduits or direct installation).
- Optical fibre types: applicable single-mode classes (B1.1, B2, B4, B6) and multimode fibre considerations.
- Mechanical and environmental tests: minimum test regimes for conduits and cables to verify durability in sewer environments (mechanical loads, chemical exposure, cleaning and maintenance stresses).
- Installation and operating conditions: requirements for installation by blowing/pulling, installation limits, and acceptable operating conditions inside sewers.
- Rodent protection and armouring: provisions for protecting cables in harsh subterranean environments.
- Blank detail specification and annexes: templates for purchaser/supplier detail specifications, examples of conduit/cable constructions, and sample installation schemes (including robotized conduit installation and spanning/laying examples).
Applications
IEC 60794-3-40:2008 is practical for:
- Deployment of optical fibre sewer cables in urban infrastructures where direct access is limited.
- Use cases involving installation by blowing or pulling, such as inserting cables into pre-installed conduits within sewer systems.
- Design, procurement and testing of cables for networks crossing storm drains, sanitary sewers and laterals - including man-accessible and non-man-accessible situations.
- Projects requiring documented compliance with international tests for mechanical, chemical and environmental resilience.
Who should use this standard
- Cable manufacturers and designers specifying sewer-rated optical fibre cables.
- Network planners and system integrators evaluating installation methods (blowing/pulling) in sewer ducts.
- Utilities, sewer operators and municipalities that host telecom infrastructure in sewer systems.
- Test laboratories and procurement teams preparing detail specifications and acceptance tests.
Related Standards
Important companion documents:
Keywords: IEC 60794-3-40:2008, optical fibre cables, sewer cables, conduits, blowing, pulling, non-man accessible sewers, outdoor cables, installation, IEC.
Open preview (PDF)Optical fibre cables - Part 3-40: Outdoor cables - Family specification for sewer cables and conduits for installation by blowing and/or pulling in non-man accessible storm and sanitary sewers
