Overview
IEC 60939-2-1:2004 is a blank detail specification published by the IEC for complete filter units for radio interference suppression. It is a supplementary document to the Part 2 sectional specification and defines the required style, layout and minimum content of detail specifications for passive filter units for electromagnetic interference (EMI) suppression - specifically filters for which safety tests are required. The document addresses assessment levels D and DZ (Zero defect) and is intended primarily for components manufactured in mass production. Where approval and requalification tests drive significant cost, IEC 60939-2-2 may be more appropriate.
Key topics and requirements
- Purpose: prescribe the structure and minimum content of national or vendor detail specifications so that components can be assessed and listed (e.g., IECQ).
- Assessment levels: supports level D and DZ (zero-defect) quality regimes.
- Identification & layout: required front‑page data (national body, IECQ number, reference to IEC 60939-1/2, component description, outline drawing, assessment level, reference data).
- Ratings & characteristics: rated voltage/current, category voltage, insertion loss (no-load and under load/temperature), DC line resistance, insulation/discharge resistance, climatic category and temperature ratings, and temperature-rise limits.
- Dimensions & outline: case-size tables and tolerances for interchangeability.
- Marking & ordering information: marking requirements, ordering data (type designation, rated voltage, specification reference).
- Inspection & testing:
- Lot-by-lot (Group A / B) and periodic (Group C) test schedules, sampling procedures and AQLs referenced to IEC 60410.
- Typical tests referenced: visual examination, dimensions/gauging, insertion loss (Annex A), DC line resistance/voltage drop, voltage proof, insulation resistance, discharge resistance, solderability, robustness of terminations, solvent resistance, vibration, bump, shock, rapid temperature change.
- Qualification approval and quality conformance procedures consistent with IEC 60939-2.
- Normative references: IEC 60384-1, IEC 60410, IEC 60939-1, IEC 60939-2.
Applications and who uses it
- Manufacturers of passive EMI filter units used for mains or signal-line suppression who need to create detail specifications for IECQ approval or national registration.
- Quality, inspection and test engineers establishing lot-by-lot and periodic test plans for mass-produced filters.
- Procurement and component engineers who require detailed, standardized specification data (insertion loss, rated voltages, dimensions, marking) for vendor qualification.
- Test laboratories and certification bodies performing safety and EMC‑related tests on filter assemblies.
- Design engineers integrating mains or EMI filters into equipment requiring documented safety and performance attributes.
Related standards (if applicable)
- IEC 60939-1 - Complete filter units for radio interference suppression - Part 1: Generic specification
- IEC 60939-2 - Part 2: Sectional specification
- IEC 60939-2-2 - Alternative detail specification (for components with costly approval/requalification)
- IEC 60384-1 - Fixed capacitors (relevant for X/Y capacitor content)
- IEC 60410 - Sampling plans and inspection procedures
Keywords: IEC 60939-2-1, complete filter units, radio interference suppression, passive filter units, electromagnetic interference suppression, assessment level D, assessment level DZ, blank detail specification, IECQ, insertion loss, insulation resistance, voltage proof, solderability, sampling plan.
Open preview (PDF)Complete filter units for radio interference suppression - Part 2-1: Blank detail specification - Passive filter units for electromagnetic interference suppression - Filters for which safety tests are required (assessment level D/DZ)
