Overview
IEC 60966-2-5:2009 is an international standard issued by the International Electrotechnical Commission (IEC) that specifies detailed requirements for radio frequency (RF) and coaxial cable assemblies used in radio and TV receivers. The standard addresses cable assemblies with a frequency range from 0 MHz to 1,000 MHz and applies specifically to flexible coaxial cables described by IEC 60096-2. It focuses on the cable assemblies subfamily 9,52, which incorporate connectors compliant with IEC 61169-2.
This third edition, published in 2009, revises the previous edition by updating references and introducing requirements related to screening attenuation for improved electromagnetic compatibility (EMC).
Key Topics
-
Scope and Application
Defines technical criteria for RF and coaxial cable assemblies used in consumer radio and television receivers, ensuring compatibility and performance across a frequency range from DC to 1 GHz.
-
Connector Specification
Specifies cable assemblies utilizing IEC 61169-2 type connectors, which include straight and right-angle plugs and sockets suited for 75 Ω characteristic impedance systems.
-
Performance Parameters
- Reflection Properties:
Minimum reflection loss values are defined, e.g., greater than 23 dB from 5 MHz to 400 MHz, ensuring minimal signal reflections that degrade signal quality.
- Insertion Loss:
Defined at less than 0.08 dB + 0.4 dB per meter up to 1,000 MHz, supporting efficient signal transmission.
- Screening Effectiveness:
Includes transfer impedance limits (e.g., <5 mΩ/m for Class A at 5-30 MHz) and screening attenuation requirements (>85 dB for Class A from 30 MHz to 1,000 MHz) to minimize external electromagnetic interference.
- Voltage and Insulation:
Voltage proof up to 1.0 kV (50-65 Hz), insulation resistance above 10 MΩ, ensuring safety and reliability.
-
Mechanical Requirements
Specifies tensile strength (>45 N), flexure endurance (500 cycles at 5 N), flexing endurance, and crushing resistance (>700 N), guaranteeing durability in typical installation and operational conditions.
-
Testing and Quality Assurance
Defined test groups cover visual inspection, dimensional inspection, electrical characteristics, and mechanical strength. Tests may be conducted lot-by-lot or at specified intervals under qualification and capability approval procedures.
-
Referenced Standards
To ensure completeness, this detail specification is intended to be used in conjunction with:
Applications
IEC 60966-2-5 primarily targets manufacturers, testers, and quality controllers of RF cable assemblies used in the broadcast and consumer electronics industries. Specific applications include:
-
Radio and TV Receivers:
Ensures reliable signal transmission systems for household and commercial radio and television reception equipment, aligning with performance and durability expectations.
-
Cable Assembly Manufacturing:
Guides design, production, and testing processes for compliant coaxial assemblies, supporting standardization and interoperability.
-
Electromagnetic Compatibility (EMC):
Assists in meeting EMC requirements by specifying screening attenuation and transfer impedance parameters, reducing signal interference and improving receiver performance.
-
Installation and Field Use:
Provides guidelines for mechanical robustness to withstand bending, flexing, and crushing stresses encountered during installation and everyday use.
Related Standards
For comprehensive understanding and implementation, consider the following connected IEC publications:
- IEC 60966-1:1999 – Generic requirements and test methods for RF and coaxial cable assemblies.
- IEC 60966-2-1:2008 – Sectional specification for flexible coaxial cable assemblies.
- IEC 60966-2-2:2003 – Blank detail specification serving as a template for flexible coaxial cable assemblies.
- IEC 61169-2 – Specifications for 9.52 mm series radio frequency coaxial connectors.
- IEC 62153-4-3 – Electromagnetic compatibility test methods focusing on surface transfer impedance.
These connected standards provide a robust framework for the design, manufacturing, testing, and certification of RF and coaxial cable assemblies, ensuring global interoperability, safety, and performance compliance across audio-visual reception applications.
Keywords: IEC 60966-2-5, coaxial cable assembly, radio frequency cable, TV receiver cable, IEC 61169-2 connectors, frequency range 0-1000 MHz, screening attenuation, reflection loss, insertion loss, cable assembly testing, electromagnetic compatibility, flexible coaxial cable, IEC standards, RF cable quality, cable mechanical requirements.
Open preview (PDF)Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors
