IEC 61156-1:2023 PDF

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Open preview (PDF)

Title (English):

IEC 61156-1:2023

Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 173
Publication date:: March 14, 2023
Edition:: IEC IS 61156 edition 4 version 1
ICS:: 33.120.20

Delivery type:

Full version35 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:35 €

Description (English):

IEC 61156-1:2023 specifies the definitions, requirements and test methods of multicore, symmetrical pair and quad cables. This document is applicable to communication systems such as local area networks (LANs) and data communication cables. It is also applicable to cables used for industrial applications, customer premises wiring and generic cabling comprising installation cables and cables for work area wiring which are defined in ISO/IEC 11801 (all parts). The cables covered by this document are intended to operate with voltages and currents normally encountered in communication systems. While these cables are not intended to be used in conjunction with low impedance sources, for example the electric power supplies of public utility mains, they are intended to be used to support the delivery of low voltage remote powering applications including but not restricted to Power over Ethernet as specified in ISO/IEC/IEEE 8802-3.

Technical details

Technical committee: SC 46C - Wires and symmetric cables
SKU: IEC 61156-1:2023

Abstract

Overview - IEC 61156-1:2023 (Multicore & symmetrical pair/quad cables)

IEC 61156-1:2023 is the fourth edition generic specification for multicore and symmetrical pair/quad cables for digital communications. It defines terminology, construction requirements and standardized test methods for communication cables used in LANs, data communication systems, industrial installations and customer premises wiring. The standard covers installation and work‑area cables defined in ISO/IEC 11801, and addresses cables intended to carry voltages and currents normally encountered in communications, including support for low‑voltage remote powering applications such as Power over Ethernet (PoE) (per ISO/IEC/IEEE 8802-3).

Key topics and technical requirements

The standard lays out comprehensive requirements and test procedures across these areas:

Materials & cable construction
- Conductor, insulation, cable elements, screening, sheath and identification.
Electrical characteristics & tests
- Conductor resistance, resistance unbalance, dielectric strength, insulation resistance, mutual capacitance and capacitance unbalance to earth.
- Transfer impedance and coupling attenuation relevant to screened and unscreened designs.
- Current‑carrying capacity for powered cabling.
Transmission performance
- Velocity of propagation, phase delay and delay skew (differential delay).
- Attenuation, unbalance attenuation, characteristic impedance and return loss.
- Crosstalk measurements: near‑end (NEXT), far‑end (FEXT), and alien (exogenous) crosstalk for bundled installations.
Mechanical & environmental tests
- Dimensional checks, tensile/elongation, bending, crush, impact, repeated bending, vibration and shock.
- Ageing, damp heat, cold flex, solvent resistance, water immersion, flame propagation, halogen gas evolution, smoke and toxic gas emission.
Test setups
- Defined measurement configurations (baluns, termination, drum winding and bundling) to ensure repeatable lab verification.

Applications & who uses IEC 61156-1:2023

This standard is essential for:

Cable manufacturers designing and qualifying multicore, pair and quad cables.
Test laboratories performing standardized electrical, mechanical and environmental testing.
Network designers and system integrators specifying cable performance for LANs, industrial Ethernet, structured cabling and PoE deployments.
Procurement and compliance teams writing technical specifications and acceptance criteria.
Standards developers and safety authorities coordinating cabling performance with building and fire codes.

Related standards

ISO/IEC 11801 (generic cabling for customer premises wiring)
ISO/IEC/IEEE 8802-3 (Power over Ethernet)
Other parts of the IEC 61156 series (for specific constructions and performance classes)

By following IEC 61156-1:2023, stakeholders ensure consistent, testable cable performance for reliable digital communications and power‑over‑data applications.

Related standards

Mentioned in the description and other IEC standards

Abstract

Overview - IEC 61156-1:2023 (Multicore & symmetrical pair/quad cables)

Key topics and technical requirements

The standard lays out comprehensive requirements and test procedures across these areas:

Materials & cable construction
- Conductor, insulation, cable elements, screening, sheath and identification.
Electrical characteristics & tests
- Conductor resistance, resistance unbalance, dielectric strength, insulation resistance, mutual capacitance and capacitance unbalance to earth.
- Transfer impedance and coupling attenuation relevant to screened and unscreened designs.
- Current‑carrying capacity for powered cabling.
Transmission performance
- Velocity of propagation, phase delay and delay skew (differential delay).
- Attenuation, unbalance attenuation, characteristic impedance and return loss.
- Crosstalk measurements: near‑end (NEXT), far‑end (FEXT), and alien (exogenous) crosstalk for bundled installations.
Mechanical & environmental tests
- Dimensional checks, tensile/elongation, bending, crush, impact, repeated bending, vibration and shock.
- Ageing, damp heat, cold flex, solvent resistance, water immersion, flame propagation, halogen gas evolution, smoke and toxic gas emission.
Test setups
- Defined measurement configurations (baluns, termination, drum winding and bundling) to ensure repeatable lab verification.

Applications & who uses IEC 61156-1:2023

This standard is essential for:

Cable manufacturers designing and qualifying multicore, pair and quad cables.
Test laboratories performing standardized electrical, mechanical and environmental testing.
Network designers and system integrators specifying cable performance for LANs, industrial Ethernet, structured cabling and PoE deployments.
Procurement and compliance teams writing technical specifications and acceptance criteria.
Standards developers and safety authorities coordinating cabling performance with building and fire codes.

Related standards

ISO/IEC 11801 (generic cabling for customer premises wiring)
ISO/IEC/IEEE 8802-3 (Power over Ethernet)
Other parts of the IEC 61156 series (for specific constructions and performance classes)

By following IEC 61156-1:2023, stakeholders ensure consistent, testable cable performance for reliable digital communications and power‑over‑data applications.

IEC 61156-1:2023 PDF

Technical details

Abstract

Overview - IEC 61156-1:2023 (Multicore & symmetrical pair/quad cables)

Key topics and technical requirements

Applications & who uses IEC 61156-1:2023

Related standards

Related standards

Abstract

Overview - IEC 61156-1:2023 (Multicore & symmetrical pair/quad cables)

Key topics and technical requirements

Applications & who uses IEC 61156-1:2023

Related standards

Related standards

Amendment 1 - Specification for the testing of balanced and coaxial information technology cabling - Part 2:…

Multicore and symmetrical pair/quad cables for digital communications - Part 5-2: Symmetrical pair/quad cable…

Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 409: Glass tex…

Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional co…

Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional lea…

Optical amplifiers - Test methods - Part 3-3: Noise figure parameters - Signal power to total ASE power ratio

Fire hazard testing - Part 11-20: Test flames - 500 W flame test method