Overview
IEC 61169-17:2022 is an international standard published by the International Electrotechnical Commission (IEC) that specifies sectional requirements for RF coaxial connectors-specifically the series TNC type with 50-ohm characteristic impedance and an inner diameter of 6.5 mm for the outer conductor. These connectors feature screw coupling and are widely used in microwave transmission systems operating up to 11 GHz.
This standard provides critical guidelines for preparing detailed specifications (DS) for TNC connectors, including precise mating face dimensions for high-performance grade 2 connectors, dimensional details for grade 0 standard test connectors, gauging information, and testing procedures based on IEC 61169-1. IEC 61169-17:2022 also outlines recommended performance characteristics and test schedules for quality assessments according to assessment levels M and H.
Key Topics
-
Scope and Purpose
Defines the framework for detail specifications related to series TNC RF coaxial connectors with a characteristic impedance of 50 Ω and screw coupling, facilitating consistency and interoperability across designs and manufacturers.
-
Mating Face Dimensions
Establishes standardized dimensions for the connector's mating face-critical for ensuring robust mechanical and electrical connections. Details are specified for connectors with pin and socket center contacts, identifying high-performance (grade 2) and test (grade 0) variants.
-
Gauging and Quality Control
Includes specifications for gauges used to verify connector dimensions, ensuring conformance and interchangeability. Gauges for the pin center contact, socket center contact, and outer conductor are clearly defined.
-
Testing and Performance Requirements
Summarizes performance ratings and characteristics to be considered when designing or specifying connectors. It also lists acceptance and periodic tests for durability, environmental resistance, electrical performance, and mechanical reliability drawn from IEC 61169-1 standards.
-
Preparation of Detail Specifications (DS)
Offers detailed instructions and a blank pro-forma for writing DS documents, covering identification, performance parameters, marking, ordering information, and applicable test procedures.
-
Assessment Levels
Test schedules and inspection requirements are provided for assessment levels M (medium) and H (high), allowing for tailored quality assurance depending on end-use applications.
Applications
-
Microwave Transmission Systems
The TNC connectors standardized under IEC 61169-17:2022 are essential components in RF and microwave infrastructure, including telecommunications, radar, and broadcast systems operating up to 11 GHz.
-
RF Cables and Microstrip Connections
Compatible with a wide variety of RF cables and microstrip lines, these connectors facilitate reliable signal transmission in complex electronic assemblies.
-
High-Performance Electrical Equipment
This standard benefits manufacturers requiring dimensional precision and strict performance standards, ensuring product interoperability across global markets.
-
Quality Assurance Programs
Serves as a reference for engineers and quality personnel defining testing protocols and inspection methods to maintain high product reliability and compliance with international norms.
Related Standards
-
IEC 61169-1:2013
Generic specification establishing general requirements and measurement methods for radio-frequency connectors, which IEC 61169-17 references for testing and gauging techniques.
-
IEC 62153-4-7
Specifies test methods for electromagnetic compatibility (EMC) related to connectors and assemblies, including transfer impedance measurement relevant to TNC connectors.
-
IEC 62037-3
Defines procedures for measuring passive intermodulation levels in coaxial connectors, ensuring minimal signal distortion in RF applications.
-
ISO/IEC Directives
Guides the standardization process for creating consistent, high-quality technical documents ensuring international consensus and clarity.
Keywords: IEC 61169-17, RF coaxial connectors, TNC connectors, 50 ohms impedance, screw coupling, radio-frequency connectors, microwave transmission, connector specifications, mating face dimensions, quality assessment, IEC standards, electromagnetic compatibility, intermodulation measurement, RF cable connectors.
Open preview (PDF)Radio-frequency connectors - Part 17: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with screw coupling - Characteristic impedance 50 ohms (Type TNC)
