Overview
IEC 61215-1-1:2016 is an international standard published by the International Electrotechnical Commission (IEC) that focuses on the design qualification and type approval of terrestrial crystalline silicon photovoltaic (PV) modules. This part of the IEC 61215 series specifically addresses the special requirements for testing crystalline silicon PV modules, ensuring their long-term reliable operation in general open-air climate conditions as outlined in IEC 60721-2-1.
The standard aims to verify the electrical and thermal characteristics of crystalline silicon PV modules through a rigorous test sequence. The objective is to demonstrate the module’s ability to withstand prolonged environmental exposure, thus supporting safe deployment of high-performance PV technology under realistic operational scenarios.
IEC 61215-1-1:2016 is applicable exclusively to flat plate terrestrial crystalline silicon PV modules and excludes modules used with high concentration sunlight systems. Modules designed for low concentration (1 to 3 suns) applications may be tested following the standard with appropriate adjustments.
Key Topics
-
Design Qualification and Type Approval
The standard defines requirements and procedures for assessing module durability and performance, enabling manufacturers and stakeholders to certify crystalline silicon PV modules according to global benchmarks.
-
Test Procedures and Requirements
IEC 61215-1-1:2016 incorporates technology-specific modifications to the general testing methods from IEC 61215-1:2016 and IEC 61215-2:2016, ensuring that tests accurately represent conditions experienced by crystalline silicon modules. Important tests include:
- Visual inspection (MQT 01)
- Maximum power determination (MQT 02)
- Insulation tests (MQT 03)
- Temperature coefficient measurements (MQT 04)
- Nominal Module Operating Temperature (NMOT) measurement (MQT 05)
- Performance testing at Standard Test Conditions (STC) and NMOT (MQT 06)
- Outdoor exposure and durability tests (e.g., hot-spot endurance, UV preconditioning, thermal cycling)
-
Pass Criteria and Reporting
The standard stipulates clear pass criteria, including the maximum allowable reproducibility value of 1.0%, and requires comprehensive reporting documentation. This ensures traceability and transparency in the qualification process.
-
Electrical and Thermal Characterization
Critical to module qualification, these measurements ensure that crystalline silicon PV modules meet performance thresholds under varying thermal loads and irradiance conditions.
Applications
IEC 61215-1-1:2016 is essential for manufacturers, testing laboratories, certification bodies, and project developers who require rigorous validation of crystalline silicon PV modules' performance and durability. It is especially useful for:
-
Module Manufacturers
To design, test, and validate crystalline silicon modules, ensuring compliance with international quality and safety standards, thereby increasing market acceptance.
-
Certification Bodies
To provide reliable certification and type approval services based on standardized and globally recognized test methods.
-
Project Developers and EPCs
To select qualified crystalline silicon PV modules with proven longevity and performance for solar power installations in various climatic conditions.
-
Research and Development
To guide product improvements and innovations in PV module technology by benchmarking against standardized test criteria.
Related Standards
-
IEC 61215-1:2016 and IEC 61215-2:2016
Fundamental parts of the IEC 61215 series providing the general requirements and test methods for design qualification and type approval of terrestrial PV modules.
-
IEC 60721-2-1
Defines classifications for environmental conditions to which PV modules are subjected, crucial for determining test sequences and exposure criteria.
-
Other IEC PV Standards
Including IEC 61730 series for PV module safety qualification and IEC 61853 for performance testing under various irradiance and temperature conditions.
Keywords: IEC 61215-1-1:2016, crystalline silicon photovoltaic modules, design qualification, type approval, test procedures, PV module testing, terrestrial photovoltaic modules, IEC standards, photovoltaic module durability, electrical and thermal characterization, photovoltaic certification.
Open preview (PDF)Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules
