Overview
IEC 61326-3-1:2017 is an international standard developed by the International Electrotechnical Commission (IEC) focusing on the electromagnetic compatibility (EMC) immunity requirements for electrical equipment used in measurement, control, and laboratory settings-specifically for safety-related systems and equipment intended to perform safety-related (functional safety) functions in industrial applications. This standard, part of the IEC 61326 series, is applicable to equipment that must comply with safety integrity levels (SIL) 1 to 3 as defined by IEC 61508, supporting the rigorous demands of functional safety in challenging industrial environments.
Updated in its second edition, IEC 61326-3-1:2017 introduces several key technical revisions and is intended to be used alongside IEC 61326-1. The scope is limited to general industrial applications and does not cover equipment used in potentially explosive environments or specific process industries.
Key Topics
-
Functional Safety Compliance: Focuses on systems performing safety-related functions with specified safety integrity levels (SIL 1-3), ensuring they operate correctly under electromagnetic disturbances.
-
EMC Immunity Requirements: Specifies the test procedures and performance criteria for immunity to a range of electromagnetic phenomena, essential for maintaining system reliability in industrial environments.
-
Technical Revisions:
- Extension of radio-frequency electromagnetic field immunity tests up to 6 GHz.
- Adoption of performance criterion DS (Defined State) in line with IEC 61000-6-7, replacing the previous criterion FS.
- Expanded consideration of device immunity with higher current consumption, referencing IEC 61000-4-34 for devices exceeding 16 A.
- Updated tables and figures on frequency ranges and test configurations for improved clarity.
-
Test Plans and Configurations: Detailed guidance on preparing, configuring, and documenting EMC tests on equipment under test (EUT), including assembly, I/O ports, auxiliary equipment, cabling, and operational conditions during testing.
Applications
IEC 61326-3-1:2017 applies to a wide range of general industrial applications where electrical equipment for measurement, control, and laboratory use is required to support or implement safety functions. Typical use cases include:
- Industrial Automation and Process Control: Ensuring programmable controllers, sensors, actuators, and distributed control systems remain unaffected by electromagnetic interference, safeguarding personnel and process safety.
- Safety Instrumented Systems (SIS): Deployment in systems where functional safety is critical, such as emergency shutdown, fire/gas detection, and interlock functions.
- Laboratory and Measurement Equipment: Application in equipment that performs or supports safety functions in testing and calibration environments in industrial facilities.
- High Current Devices: Testing immunity in equipment consuming more than 16 A, critical for large, power-intensive installations.
By meeting IEC 61326-3-1 requirements, manufacturers and integrators demonstrate robust EMC immunity, supporting certification and acceptance in regulated markets, and minimizing the risk of dangerous equipment failures due to electromagnetic disturbances.
Related Standards
IEC 61326-3-1:2017 references and relates to several key international standards crucial for EMC and functional safety:
-
IEC 61326-1: General EMC requirements for measurement, control, and laboratory equipment.
-
IEC 61508: Functional safety of electrical/electronic/programmable electronic safety-related systems (defines SIL levels and overarching safety principles).
-
IEC 61000 Series: Comprehensive suite for EMC testing and test methods, notably:
-
ISO/IEC Guide 51: General safety aspects and guidelines for inclusion in standards.
Adhering to IEC 61326-3-1 helps ensure electrical equipment involved in safety functions can withstand electromagnetic interference, maintain system integrity, and protect users and processes within demanding industrial environments.
Keywords: IEC 61326-3-1, EMC requirements, functional safety, SIL, industrial automation, safety-related systems, electrical equipment, measurement and control, electromagnetic immunity, IEC 61508, safety instrumented systems, high current devices.
Open preview (PDF)Electrical equipment for measurement, control and laboratory use - EMC requirements – Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) – General industrial applications
