Overview
IEC 62053-22:2003 - Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S) - defines type-test requirements for newly manufactured, transformer‑operated static watt‑hour meters used indoors to measure alternating‑current active energy in 50 Hz or 60 Hz networks. The standard applies to accuracy classes 0,2 S (0.2S) and 0,5 S (0.5S) and is intended to be used together with IEC 62052-11 (general metering tests and conditions).
Key Topics and Technical Requirements
- Scope and limits: Type testing only; applies to indoor transformer‑operated static watt‑hour meters with integrated measuring element and register. Excludes meters with terminal voltages >600 V, portable/outdoor meters, data interfaces and reference meters.
- Accuracy classes: Specific provisions for precision classes 0,2 S and 0,5 S, including error limits and interpretation of test results.
- Electrical tests: Detailed electrical requirements covering power consumption, influence of short‑time overcurrents, self‑heating, AC voltage tests and accuracy under varying conditions.
- Power consumption: Defined limits for voltage and current circuits (example: voltage circuit power consumption values specified in Table 1; current circuit burden typically 1 VA). Overall measurement error for power‑consumption determination shall not exceed 5%.
- Short‑time overcurrents: Meters must tolerate 0.5 s surges up to 20 × Imax (with specified tolerance) and return to correct operation; variation of error after recovery shall not exceed 0.05%.
- Self‑heating: Limits on error variation due to self‑heating are specified; standardized test procedure applies (voltage energized, then apply maximum current and record error over time).
- Test conditions and interpretation: Reference conditions, test circuits (including sub‑harmonics), and acceptance criteria for type tests are covered in detail.
- Complementary requirements: Mechanical, climatic and normative references align with IEC 62052-11 and other IEC documents.
Practical Applications
- Ensures meter accuracy and reliability for billing‑grade static meters deployed in commercial and industrial installations.
- Supports Smart Grid initiatives by certifying high‑accuracy meters (0.2S/0.5S) needed for advanced grid monitoring, energy settlement, and demand response.
- Provides manufacturers and test laboratories with standardized procedures for type approval and product development.
Who Uses This Standard
- Meter manufacturers and product designers
- Accredited test laboratories and conformity assessment bodies
- Electric utilities, regulators and meter procurement teams
- Smart Grid integrators and system architects requiring high‑precision metering
Related Standards
- IEC 62052-11 (General requirements, tests and test conditions)
- IEC 60044-1 (Instrument/current transformers)
- IEC 62053-61 (Power consumption and voltage requirements)
- Other IEC 62053/62059 series documents for dependability and additional meter types
Keywords: IEC 62053-22, static watt-hour meters, active energy, accuracy class 0.2S, 0.5S, type tests, electricity metering, Smart Grid, power consumption, short-time overcurrent, self-heating.
Open preview (PDF)Electricity metering equipment (a.c.) - Particular Requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
