Overview

ISO 10893-10:2011/Amd 1:2020 is an amendment to the internationally recognized ISO 10893-10 standard. It addresses automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes. The primary focus of this amendment is on the detection of longitudinal and/or transverse imperfections in steel tubes using non-destructive ultrasonic methods. The 2020 amendment specifically revises the ultrasonic test frequency ranges and updates criteria for acceptance, improving both reliability and efficiency in steel tube testing.

Key Topics

Ultrasonic Test Frequency Updates:
- The amendment changes the frequency range for Lamb wave techniques from 0.3 MHz–1 MHz to 0.3 MHz–5 MHz.
- It maintains the shear wave technique frequency at 1 MHz–15 MHz.
- Adjustments in test frequency expand the flexibility and applicability of ultrasonic testing.
Change in Acceptance Criteria:
- The number of required retests before acceptance is reduced from two to one.
- If after one retest all signals are below the trigger/alarm level, the steel tube passes the test.
- If not, the tube is marked as suspect, streamlining the decision process for quality assurance.
Scope of Application:
- Applies to seamless and welded steel tubes, excluding submerged arc-welded tubes.
- Covers detection of both longitudinal and transverse imperfections along the entire periphery of the tube.

Applications

ISO 10893-10:2011/Amd 1:2020 is highly relevant for industries where steel tube integrity is crucial. Its applications include:

Manufacture of Steel Tubes: Manufacturers must perform non-destructive testing (NDT) to validate the structural integrity and quality of steel tubes before dispatch.
Quality Assurance and Inspection: Automated ultrasonic testing supports rapid, reproducible, and accurate inspection processes, reducing the risk of undetected imperfections.
Pressure Vessels and Piping: The standard is necessary for components used in pressure systems where any imperfection can compromise safety or performance.
Oil & Gas, Energy, and Construction Sectors: These industries utilize seamless and welded steel tubes extensively, relying on the improved criteria and updated testing methods to ensure product reliability.

Related Standards

Organizations implementing this amendment may also consult related international standards for comprehensive steel tube testing and quality control:

ISO 10893 Series: The parent series covers various non-destructive testing methods, including electromagnetic and ultrasonic testing.
ISO 9302: Specifies reference blocks for the calibration of ultrasonic testing equipment.
ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories.
ISO 17640: Relates to ultrasonic testing of welds, complementing the application of this standard for welded tubes.

Practical Value

By adopting ISO 10893-10:2011/Amd 1:2020:

Steel tube manufacturers enhance testing accuracy and reduce inspection cycle times.
Updated acceptance criteria allow faster quality decisions, minimizing production delays.
Broader frequency range for Lamb waves increases adaptability to different tube types and dimensions.
The amendment supports compliance with global trade practices, boosting acceptance in international markets.

ISO 10893-10:2011/Amd 1:2020 represents a significant advancement in steel tube testing methods, ensuring safety, reliability, and efficiency in critical industry sectors.

Overview

Key Topics

Ultrasonic Test Frequency Updates:
- The amendment changes the frequency range for Lamb wave techniques from 0.3 MHz–1 MHz to 0.3 MHz–5 MHz.
- It maintains the shear wave technique frequency at 1 MHz–15 MHz.
- Adjustments in test frequency expand the flexibility and applicability of ultrasonic testing.
Change in Acceptance Criteria:
- The number of required retests before acceptance is reduced from two to one.
- If after one retest all signals are below the trigger/alarm level, the steel tube passes the test.
- If not, the tube is marked as suspect, streamlining the decision process for quality assurance.
Scope of Application:
- Applies to seamless and welded steel tubes, excluding submerged arc-welded tubes.
- Covers detection of both longitudinal and transverse imperfections along the entire periphery of the tube.

Applications

ISO 10893-10:2011/Amd 1:2020 is highly relevant for industries where steel tube integrity is crucial. Its applications include:

Manufacture of Steel Tubes: Manufacturers must perform non-destructive testing (NDT) to validate the structural integrity and quality of steel tubes before dispatch.
Quality Assurance and Inspection: Automated ultrasonic testing supports rapid, reproducible, and accurate inspection processes, reducing the risk of undetected imperfections.
Pressure Vessels and Piping: The standard is necessary for components used in pressure systems where any imperfection can compromise safety or performance.
Oil & Gas, Energy, and Construction Sectors: These industries utilize seamless and welded steel tubes extensively, relying on the improved criteria and updated testing methods to ensure product reliability.

Related Standards

Organizations implementing this amendment may also consult related international standards for comprehensive steel tube testing and quality control:

ISO 10893 Series: The parent series covers various non-destructive testing methods, including electromagnetic and ultrasonic testing.
ISO 9302: Specifies reference blocks for the calibration of ultrasonic testing equipment.
ISO/IEC 17025: General requirements for the competence of testing and calibration laboratories.
ISO 17640: Relates to ultrasonic testing of welds, complementing the application of this standard for welded tubes.

Practical Value

By adopting ISO 10893-10:2011/Amd 1:2020:

Steel tube manufacturers enhance testing accuracy and reduce inspection cycle times.
Updated acceptance criteria allow faster quality decisions, minimizing production delays.
Broader frequency range for Lamb waves increases adaptability to different tube types and dimensions.
The amendment supports compliance with global trade practices, boosting acceptance in international markets.

ISO 10893-10:2011/Amd 1:2020 represents a significant advancement in steel tube testing methods, ensuring safety, reliability, and efficiency in critical industry sectors.

ISO 10893-10:2011/Amd 1:2020 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related Standards

Practical Value

Related standards

Abstract

Overview

Key Topics

Applications

Related Standards

Practical Value

Related standards

Non-destructive testing of steel tubes — Part 10: Automated full peripheral ultrasonic testing of seamless an…

Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless an…

Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Electromagnetic testing…

Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to I…

Non-destructive testing of welds - Ultrasonic testing - Techniques, testing levels, and assessment (ISO 17640…