Overview
ISO 11040-2:2011 is an international standard developed by the International Organization for Standardization (ISO) that specifies requirements for plunger stoppers used in dental local anaesthetic cartridges. It covers the essential parameters such as shape, dimensions, materials, performance, and labelling of these single-use elastomeric components. The standard ensures that plunger stoppers meet strict quality controls to maintain the safety, efficacy, and reliability of dental local anaesthetic delivery systems.
This standard is part of the ISO 11040 series on prefilled syringes and complements related parts focusing on glass cylinders, seals, and barrels for injectable medications.
Key Topics
-
Shape and Dimensions
ISO 11040-2 precisely defines the shape and dimensional tolerances of plunger stoppers, classified into three types (A, B, and C) based on the presence and number of cavities. The dimensional consistency supports compatibility with dental anaesthetic cartridges as described in ISO 11040-1.
-
Material Requirements
Plunger stoppers must be made from elastomeric materials tested for durability, biocompatibility, and resistance to sterilization methods (e.g., autoclaving at 121 °C). The material should also comply with biological and chemical testing requirements referenced in ISO 8871 series and withstand ageing without loss of performance.
-
Performance Criteria
- Hardness: The elastomer hardness is controlled to ensure reliable functionality.
- Leakage Prevention: The standard mandates that the sealing performance resists leakage under stress to prevent contamination and ensure patient safety.
- Sliding Characteristics: The interaction between the plunger stopper and cartridge barrel must allow consistent, smooth movement to facilitate precise anaesthetic administration.
-
Labelling and Designation
Proper labelling includes the identification of the plunger stopper type and reference to ISO 11040-2. This supports traceability and regulatory compliance.
-
Testing Procedures
Annex A details a normative leakage test involving water-filled cartridges subjected to defined pressure, confirming plunger stopper integrity. Other tests include hardness measurement and ageing resistance assessments.
Applications
ISO 11040-2:2011 primarily applies to manufacturers, assemblers, and quality assurance professionals involved in the production of dental local anaesthetic cartridges. Typical applications include:
- Design and manufacturing of primary packaging components for dental syringes
- Quality control and compliance testing of elastomeric plunger stoppers
- Regulatory submissions requiring confirmation of component safety and performance
- Ensuring compatibility between plunger stoppers and glass barrels or seals in dental anaesthetic cartridges
- Maintaining consistent product performance throughout shelf life and sterilization
By adhering to ISO 11040-2, stakeholders ensure patient safety, product reliability, and conformity with Good Manufacturing Practices (GMP) in the dental pharmaceutical sector.
Related Standards
ISO 11040-2:2011 is part of a comprehensive series related to prefilled syringes and dental anaesthetic cartridges:
Additional complementary standards include:
- ISO 8871-1 / ISO 8871-4: Elastomeric parts for pharmaceutical use - extractables and biological requirements
- ISO 15378: Good Manufacturing Practices (GMP) for primary packaging materials of medicinal products
- ISO 2230: Guidelines for storage of vulcanized rubber products
- ISO 11499: Testing sliding characteristics of cartridge closure systems
Adherence to ISO 11040-2 alongside these related standards ensures a robust framework for the development and control of dental anaesthetic cartridges, enhancing product safety and user trust worldwide.
Open preview (PDF)Prefilled syringes — Part 2: Plunger stoppers for dental local anaesthetic cartridges