Overview
ISO 1119:2011 - Geometrical product specifications (GPS) for a series of conical tapers and taper angles - gives calculated cone angles and rates of taper for general engineering use. The standard covers plain conical surfaces with cone angles from 120° down to less than 1° (taper ratios approximately 1:0.289 to 1:500). It provides reference values (Tables 1 and 2) to simplify design, production and measurement of conical parts but excludes prismatic pieces, taper threads, bevel gears and other non‑plain conical geometries.
Key topics and requirements
- Range of values: cone angles and corresponding rate of taper (ratio) across a wide spectrum for general engineering use.
- Series 1 and Series 2 initial values: recommended order of preference to reduce the range of tools, gauges and measuring instruments required in production.
- Tables:
- Table 1 - Cones for general applications (primary reference values).
- Table 2 - Selection of cones for particular applications (e.g., machine tool spindles, Jacobs/Morse tapers, medical fittings, textile industry cones).
- Dimensioning and tolerancing: cones shall be dimensioned and toleranced in accordance with ISO 3040.
- Informative guidance: Annex A describes the relation of this GPS standard to the GPS matrix model and higher‑level GPS rules.
- Decision rules and fundamentals: this standard is to be used in the GPS framework governed by ISO 8015 and the default decision rules in ISO 14253‑1.
- Note: the provided values are calculated for information and selection; Tables indicate when specific values should be used for particular applications.
Practical applications and users
ISO 1119:2011 is useful for professionals who specify, design, manufacture or inspect conical features, including:
- Mechanical designers and product engineers selecting cone angles or taper ratios
- Toolmakers and machine‑tool engineers (spindle and tool‑shank interfaces)
- Quality and metrology personnel verifying conical surfaces
- Medical device manufacturers (e.g., Luer fittings, syringes) and textile machinery designers (cones and tubes)
- Standards writers and procurement engineers ensuring interoperability between mating conical parts
Using ISO 1119 helps reduce tooling variety, streamline procurement of gauges and ensure consistency across industries that rely on standard tapers.
Related standards
Key related documents cited by ISO 1119: ISO 3040, ISO 8015, ISO 14253‑1, ISO/TR 14638 and application standards listed in Table 2 (examples: ISO 296, ISO 239, ISO 594‑1, ISO 595, ISO 368, IEC 60095‑2). These inform dimensioning, tolerance rules and domain‑specific taper selections.
Keywords: ISO 1119:2011, conical tapers, taper angles, geometrical product specifications, GPS, cone angle, rate of taper, ISO 3040, Morse taper, Jacobs taper.
Open preview (PDF)Geometrical product specifications (GPS) — Series of conical tapers and taper angles
