Overview
ISO 11665-9:2019 is part of the internationally recognized ISO 11665 series, focused on the measurement of radioactivity in the environment, specifically relating to radon-222 in air. This part of the standard defines standardized methods for the determination of the free radon exhalation rate from batches of mineral-based building materials. By covering both Liquid Scintillation Counting (LSC) and gamma ray spectrometry, ISO 11665-9:2019 supports accurate, repeatable measurement techniques essential for environmental safety, health risk assessments, and compliance with regulatory guidelines involving radon exposure.
Radon-222 exhalation from building materials is a significant factor in indoor air quality. High levels pose health risks, especially as radon decays into radioactive solids that can be inhaled. The standard helps stakeholders mitigate these risks by providing clear test procedures and definitions, ensuring consistency and reliability in testing results.
Key Topics
-
Radon-222 Measurement in Materials
Provides detailed methodologies for determining the rate at which radon-222 gases are released (exhaled) from mineral-based building materials, a key criterion for assessing product safety.
-
Test Methods
Specifies two main laboratory techniques:
- Liquid Scintillation Counting (LSC): A method suitable for silica gel adsorbents to quantify radon exhalation from materials.
- Gamma Ray Spectrometry: Detailed in annexes as an alternative method, commonly used for materials where radon is trapped in charcoal.
-
Sample Preparation and Conditioning
Outlines standard procedures for preparing and conditioning building material samples, including temperature, humidity control, and curing processes to ensure reliable measurements.
-
Instrumentation and Calibration
Lists apparatus, reagents, and calibration steps required to assure measurement accuracy and reproducibility.
-
Result Reporting and Uncertainty
Describes how to express and calculate free radon exhalation rates, uncertainties, detection limits, and thresholds in the test report.
Applications
-
Building Material Compliance
Used by manufacturers, laboratories, and regulators to verify that mineral-based building materials comply with national and international radon emission standards.
-
Health and Safety Assessments
Supports risk assessments in occupational health, public safety, and environmental monitoring by providing accurate data on radon release from construction products.
-
Research and Development
Assists in the development of low-emission building materials by enabling R&D departments to test and improve product formulations.
-
Building and Environmental Codes
Facilitates the implementation of building codes addressing indoor air quality and supports authorities in enforcing radon mitigation strategies in existing and new buildings.
Related Standards
-
ISO 11665-1
- Measurement of radioactivity in the environment - Air: radon-222 - Part 1: Origins of radon and its short-lived decay products and associated measurement methods.
-
ISO 11929
- Determination of the characteristic limits (decision threshold, detection limit and limits of the confidence interval) for measurements of ionizing radiation - Fundamentals and application.
-
ISO/IEC 17025
- General requirements for the competence of testing and calibration laboratories.
-
ISO 19361
- Conditions for measuring activity of beta emitter radionuclides by liquid scintillation counting.
For professionals and organizations involved in radiation protection, environmental health, or materials testing, implementing ISO 11665-9:2019 ensures the reliability and comparability of radon exhalation measurements. Adhering to these methods supports regulatory compliance, public health, and product innovation in construction and environmental safety sectors.
Open preview (PDF)Measurement of radioactivity in the environment — Air: Radon-222 — Part 9: Test methods for exhalation rate of building materials