Overview
ISO 12151-5:2007 defines the general and dimensional requirements for hose fittings with 37° flared ends, intended for use in hydraulic fluid power systems and general applications. These fittings are designed in compliance with ISO 8434-2 and are manufactured primarily from carbon steel for nominal hose sizes ranging from 6.3 mm to 51 mm, as specified in ISO 4397. The standard ensures compatibility, reliable performance, and safety of hose assemblies operating under pressure.
Adherence to ISO 12151-5:2007 provides manufacturers, distributors, and users with the confidence that hose fittings will meet recognized quality and interchangeability criteria, reducing the risk of system failure due to incompatible connections.
Key Topics
- General and Dimensional Requirements: The standard outlines specific dimensional and mechanical criteria necessary for 37° flared hose fittings, assuring proper fitment and sealing in fluid power systems.
- Materials: While carbon steel is the primary material, provisions are included for alternative materials when agreed between manufacturer and user.
- Performance Testing: Hose fittings and assemblies must withstand performance tests, including those outlined in ISO 6605 and ISO 19879, to ensure integrity under operational pressures and cyclic endurance.
- Design and Identification: Guidance is provided regarding the designation system for ordering (using an alphanumeric code), and the types/shapes of fittings such as straight, 45° elbow, and 90° elbow in various lengths (short, medium, long).
- Manufacture and Surface Protection: Best commercial practices are expected for workmanship. Carbon steel fittings require corrosion-resistant coatings tested to 72 hours of neutral salt spray as per ISO 9227.
- Marking and Procurement: Fittings must be permanently marked with the manufacturer's identification. Recommendations are included for procurement details, ensuring users specify the correct product for their application.
Applications
Hose fittings in accordance with ISO 12151-5:2007 are widely used in:
- Industrial Hydraulic Systems: Ensuring safe and leak-free connections for equipment where high-pressure fluids power machinery.
- Mobile Hydraulic Applications: Such as construction, agriculture, and mining equipment, where robust and compatible hydraulic connections are essential.
- General Industrial Applications: Including manufacturing, process industries, and energy sectors, where reliable fluid conveyance is required.
- Replacement and Maintenance: The standardized design supports easy replacement and compatibility in maintenance operations, simplifying logistics and reducing downtime.
- Compatibility with International and Industry-Specific Hoses: The fittings are suitable for use with hoses specified in other international standards, enhancing global interoperability.
Related Standards
For comprehensive system design and integration, ISO 12151-5:2007 should be considered alongside several related standards:
- ISO 8434-2: Defines the requirements for 37° flared connectors, directly referenced for connection details.
- ISO 4397: Specifies nominal sizes for hydraulic tubes and hoses.
- ISO 6605: Outlines methods for testing hydraulic hoses and assemblies.
- ISO 4759-1: Provides tolerances for fasteners, relevant for male and female hose fittings.
- ISO 9227: Details corrosion resistance tests necessary for surface protection of carbon steel fittings.
- ISO 6149-1: Covers ports and stud ends with O-ring sealing, often used in conjunction with 37° flared fittings.
- ISO 19879: Specifies test methods for metallic tube connections in fluid power systems.
ISO 12151-5:2007 fits within a family of ISO standards covering various hose fitting types, supporting a consistent and reliable approach to hydraulic connection technology applicable across many industrial and mobile sectors. Adhering to this standard helps ensure long-term system performance, safety, and global supply chain efficiency.
Open preview (PDF)Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends