Overview
ISO 12219-8:2018 - "Interior air of road vehicles - Part 8: Handling and packaging of materials and components for emission testing" provides practical guidance for the selection, preparation, conditioning, packaging, labelling, transportation and storage of vehicle interior materials and components destined for emissions testing. The standard focuses on preserving volatile and semi‑volatile organic compound (VOC / SVOC) emissions and preventing contamination so that VOC testing, fogging testing and odour testing produce repeatable, accurate results.
Key Topics and Requirements
- Scope and purpose: Defines how to handle samples that influence interior air quality measurements in road vehicles, with special attention to materials sensitive to contamination or rapid volatilization.
- Sampling and product selection: Samples must be representative of production parts, taken as soon as possible after manufacture and equilibrated to ambient temperature. Product samples should not be directly marked.
- Preparation and handling: Use clean gloves and oil‑free tools; avoid bare skin contact; document sample origin; leave extra material for trimming at the test laboratory.
- Conditioning and aging: Two main aging options are described - aging at the producer under normal production conditions, or aging at the test laboratory under controlled conditions. Timing is critical because emissions change rapidly with time.
- Packaging to preserve emissions: Emphasises sealing and packaging methods to halt off‑gassing and preserve emission status during transport and storage.
- Labelling and documentation: Complete, accurate labels and documentation must accompany each sample, including production dates and processing history.
- Transport and storage: Packages should avoid exposure to external VOC sources; national shipping logistics are recommended to keep the time between manufacture and receipt within practical limits (the document discusses typical timelines).
- Terminology and sample types: Defines analytical sample, product sample, test specimen and related terms used by producers, test requesters and testing laboratories.
Applications and Who Uses It
- Automotive OEMs and Tier 1 suppliers: To ensure materials and interior components sent for VOC, fogging or odour testing are handled consistently and produce reliable emission data.
- Testing laboratories: For receiving, verifying, conditioning and storing samples and for following agreed test timelines and specimen preparation procedures.
- Product developers and quality teams: To integrate handling and packaging controls into the vehicle interior materials development cycle and ensure reproducible indoor air quality assessments.
- Regulatory and compliance teams: To document traceable handling and chain‑of‑custody for emission test evidence.
Related Standards
- ISO 12219 series (other parts covering emissions test methods for vehicle interiors)
- ISO 16000‑6 and ISO 16000‑3 (referenced for background and blank sampling practices)
Keywords: ISO 12219-8:2018, interior air of road vehicles, VOC testing, emissions testing, packaging, handling, sample conditioning, odour testing, fogging testing, test specimen.
Open preview (PDF)Interior air of road vehicles — Part 8: Handling and packaging of materials and components for emission testing