Overview
ISO 12944-3:2017, "Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 3: Design considerations," defines the basic design criteria for steel structures that will be protected by paint systems. The standard helps avoid premature corrosion and coating failure by giving practical guidance and examples of appropriate and inappropriate design. It also addresses design measures that facilitate handling, transport, inspection and maintenance of coated steel.
Key Topics and Requirements
The standard emphasizes design choices that reduce corrosion risk and simplify protective coating work. Key technical topics include:
- General design principles
- Minimize exposed surface area and unnecessary geometric irregularities (overlaps, sharp edges).
- Prefer welded joints over bolted/riveted connections where corrosion risk is significant.
- Accessibility
- Design for safe application, inspection and maintenance: provision of walkways, anchorages, access openings and sufficient working space (see informative Annexes).
- Treatment of gaps and joints
- Guidance on sealing gaps and avoiding trapped deposits that undermine coatings.
- Prevention of water and deposit retention
- Design details and features to prevent corrosion traps and facilitate drainage and cleaning.
- Surface imperfections and preparation
- Consider surface prep needs early in design; requirements for higher durability environments are addressed.
- Bolted connections
- Specific considerations for slip-resistant and preloaded connections, and correct treatment of bolts, nuts and washers to protect coatings.
- Box members, hollow components and openings
- Size and placement of access openings, ventilation and inspection spaces to permit coating and maintenance.
- Notches, stiffeners and fabrication details
- Minimise features that concentrate corrosion or complicate coating application.
- Prevention of galvanic corrosion
- Material selection and design to avoid dissimilar-metal problems.
- Handling, transport and erection
- Design to withstand handling without damaging the protective paint system.
Informative annexes provide recommended tool clearances, minimum opening dimensions and design features to avoid trapped water and deposits.
Applications and Who Uses It
ISO 12944-3 is used by:
- Structural engineers and designers specifying corrosion protection measures
- Owners and asset managers defining service life and maintenance strategies
- Coating manufacturers, applicators and inspection bodies
- Fabricators and contractors responsible for transport, erection and on-site coating work
- Maintenance planners and corrosion protection consultants
This standard is essential when specifying protective paint systems, writing tender documents, or designing steelwork for long-term corrosion resistance.
Related Standards
ISO 12944-3 is part of the ISO 12944 series and references related standards such as:
Keywords: ISO 12944-3, corrosion protection, protective paint systems, steel structures, design considerations, coating accessibility, galvanic corrosion, surface preparation.
Open preview (PDF)Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations