Overview
ISO 14692-4:2017 - "Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation" provides requirements and recommendations for the fabrication, installation, inspection and maintenance of GRP piping systems used in oil and gas processing and utility service applications. The standard addresses all stages from delivery, handling and storage to system pressure testing, operation, repair and documentation. It is intended to be read in conjunction with ISO 14692‑1.
Key topics and technical requirements
- Delivery, inspection and documentation: Verification of quantities, dimensions and special requirements; visual inspection against defect criteria (see Table A.1); adhesive bonding kits and fire-protection materials checks (e.g., minimum shelf-life).
- Handling and storage: Requirements referenced in Annex B and manufacturer guidance to protect GRP components during transit and on-site storage.
- System design documentation: Installer must receive operating/design parameters (design pressure/temperature, resin and adhesive temperatures, MSP/MSOP, velocities, chemical resistance, fire and conductivity classifications, criticality and support/layout data).
- Personnel qualifications and safety: Installation and repairs to be performed by qualified GRP bonders, pipe fitters, spool-builders and inspectors per Annex C; adherence to health and safety and material safety data sheets.
- Installation practices: Guidance for cutting, jointing, supports (above-ground and buried), tolerances, on-site fabrication, fire-protective coatings, electrical conductivity and earthing requirements (Annex E), and quality programmes for installation.
- System testing: Flushing and pressure testing procedures, with associated certificates (flushing certificate, pressure test certificate) and inspection requirements.
- Maintenance and repair: Procedures for routine maintenance, cleaning scale/blockages, earthing during service, repair methods (temporary and permanent), replacement and re-certification.
- Inspection & NDE: Reference to non-destructive testing and inspector qualification (ISO 9712) and guidance in Annex F.
Applications and who uses it
ISO 14692-4:2017 is aimed at ensuring GRP piping meets performance requirements across its service life. Primary users include:
- Plant owners/principals and project engineers
- Fabrication and installation contractors, spool-builders and bonders
- Repair and maintenance contractors
- GRP piping inspectors, certifying authorities and regulators
- Designers specifying GRP for processing and utility systems in oil & gas facilities
Related standards
- ISO 14692‑1 - Vocabulary, symbols, applications and materials (must be read in conjunction)
- ISO 14692‑2:2017 - Qualification and manufacture
- ISO 9712 - Qualification and certification of NDT personnel
Keywords: ISO 14692-4:2017, GRP piping, glass-reinforced plastics, petroleum, natural gas, fabrication, installation, inspection, pressure testing, maintenance, repair, earthing, jointing.
Open preview (PDF)Petroleum and natural gas industries — Glass-reinforced plastics (GRP) piping — Part 4: Fabrication, installation and operation