Overview
ISO 16120-3:2011 is an international standard that specifies the specific requirements for rimmed and rimmed substitute low-carbon steel wire rod intended for conversion to wire. This standard applies to non-alloy steel wire rod made of low-carbon, low-silicon rimmed steel and its substitutes, characterized by high ductility. The wire rod defined in this part of ISO 16120 is primarily intended for subsequent drawing and cold rolling processes.
Developed by ISO Technical Committee ISO/TC 17, Subcommittee SC 17, this standard ensures consistency in the manufacture, quality, and performance of rimmed and rimmed substitute steel wire rods to facilitate global trade and quality assurance. The latest edition dated 2011 replaces the first 2001 edition and falls under the broader ISO 16120 series focused on non-alloy steel wire rods for wire conversion.
Key Topics
- Scope and Applicability: Covers low-carbon, low-silicon rimmed and rimmed substitute steel wire rods aimed at high ductility for wire drawing and cold rolling.
- Chemical Composition: Defines strict chemical limits including carbon, silicon, manganese, phosphorus, sulfur, and trace elements. Permissible deviations for product analysis relative to heat analysis are detailed, ensuring material consistency.
- Mechanical Properties: Sets maximum tensile strength requirements based on wire rod diameter and steel grade, supporting suitability for further mechanical processing.
- Surface Quality: Specifies limits on internal soundness and surface discontinuities such as cracks, folds, or notches, with maximum allowable depths tailored for round wire rods.
- Inclusion Assessment: Refers to assessment of non-metallic inclusions per ISO 4967 standards, critical for ductility and drawing performance.
- Scale and Mechanical Damage: Addresses the characteristics of surface scale and acceptance criteria for mechanical damage due to handling or processing, ensuring wire rod integrity.
- Designation System: Uses the designation format C##D1 to classify steel grades by carbon content and rimmed character for clear identification.
Applications
ISO 16120-3:2011 is essential for manufacturers, suppliers, and purchasers engaged in the production and use of non-alloy low-carbon steel wire rods that must meet high performance and quality criteria for further processing into wire products. Typical applications include:
- Drawing of steel wires for industrial use, such as fasteners, springs, and wire ropes.
- Cold rolling processes converting wire rod into thinner wire products requiring excellent ductility and surface quality.
- Manufacture of consumer and automotive wire components where consistent mechanical properties and surface integrity are critical for product reliability.
- Facilitates international trade and conformity assessment by providing a harmonized set of requirements recognized worldwide.
Related Standards
ISO 16120-3:2011 is part of the ISO 16120 series, which comprehensively covers non-alloy steel wire rod:
Additionally, this standard references other key ISO documents that support testing, classification, and quality control:
- ISO 377 – Sampling methods for steel mechanical tests.
- ISO 404 – General technical delivery requirements for steel.
- ISO 4967 – Micrographic method for non-metallic inclusion determination.
- ISO 4948 series – Classification of steels based on chemical composition and properties.
- ISO/TS 4949 – Steel name designation system.
Together, these standards establish a robust framework ensuring high-quality non-alloy low-carbon rimmed steel wire rods optimized for ductility, surface finish, and mechanical performance in wire conversion processes.
Keywords: ISO 16120-3, non-alloy steel wire rod, rimmed steel wire rod, low-carbon steel wire rod, wire drawing, cold rolling wire rod, steel wire rod standards, tensile strength, chemical composition steel, surface quality wire rod, non-metallic inclusions, steel wire manufacturing standards.
Open preview (PDF)Non-alloy steel wire rod for conversion to wire — Part 3: Specific requirements for rimmed and rimmed substitute, low-carbon steel wire rod