Overview
ISO 16301:2017 sets out the international requirements for rubber and plastics hoses and hose assemblies, specifically designed for use with manually operated hydraulic jacks. Covering both wire-reinforced and textile-reinforced hoses, this standard applies to hose assemblies with nominal sizes from 5 to 25 and is focused on ensuring performance safety and reliability in critical hydraulic jack applications. ISO 16301 is established by the International Organization for Standardization (ISO) and is critical for manufacturers, suppliers, and users of hydraulic equipment who require consistent product quality and safety assurance.
Key Topics
- Scope and Applicability: Specifies three classes of hose and hose assemblies for manual hydraulic hand pump jacks, covering nominal sizes 5 to 25.
- Types of Reinforcement: Covers hoses reinforced with either steel wire or textile materials, suitable for a range of hydraulic fluid types (HH, HL, HM, HR, HV) and operational temperatures from −40 °C to +55 °C.
- Performance Criteria: Defines key performance requirements such as maximum working pressure, proof pressure, minimum burst pressure, change in length, bend radius, and resistance to oil, ozone, and cold bending.
- Hazard Management: Addresses hazards related to bursting, leaking, connector failure, operator error, and sudden changes in hose assembly length to promote occupational health and safety.
- Classification and Grades: Outlines three classes based on maximum working pressure, and grades based on electrical conductivity requirements.
- Testing and Quality Control: Specifies type tests, routine tests, and recommended production test frequencies for dimensions, material composition, performance, and marking.
- Marking: Requires clear, standardized marking of hoses and hose assemblies for identification, traceability, and compliance with ISO 16301.
- Packaging and Storage: Recommends proper packaging and storage practices to preserve hose integrity and performance.
Applications
- Hydraulic Jacks: Essential for manually operated hydraulic hand pumps used in automotive, industrial, and equipment maintenance operations.
- Light-duty Hydraulic Equipment: Suitable for applications requiring reliable fluid transfer under high pressure, such as hydraulic presses and torque wrenches.
- Safety-focused Operations: Provides guidelines ensuring hoses and assemblies are resistant to oil, weather, abrasion, and temperature fluctuations, supporting safe use in demanding environments.
- Manufacturing and Quality Assurance: Used by hose manufacturers and suppliers in product design, batch testing, and certification processes to meet international standards and customer requirements.
Related Standards
- ISO 19718 - Specification for hoses and hose assemblies for heavy-duty hydraulic tool applications (e.g., rescue tools).
- ISO 6743-4 - Classification of hydraulic fluids (HH, HL, HM, HR, HV).
- ISO 1402 - Hydrostatic testing of rubber and plastics hoses and hose assemblies.
- ISO 1817 - Determination of the effect of liquids on rubber, vulcanized or thermoplastic.
- ISO 6803 - Hydraulic-pressure impulse test for hoses and assemblies.
- ISO 7326 - Assessment of ozone resistance for hoses.
- ISO 8330/ISO 8331 - Hose vocabulary and guidelines for selection, storage, and maintenance.
- ISO 10619-1/2 - Measurement of flexibility and stiffness at ambient and sub-ambient temperatures.
ISO 16301:2017 enables manufacturers, suppliers, and end users worldwide to achieve consistency, safety, and quality in wire- or textile-reinforced hydraulic hoses and assemblies for manually operated jacks. By complying with this standard, organizations can minimize the risk of failure, ensure compatibility with various hydraulic fluids, and support the safe, effective operation of critical hydraulic equipment.
Open preview (PDF)Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks — Specification