ISO 16474-3:2021 PDF

Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Open preview (PDF)

Title (English):

ISO 16474-3:2021

Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 16
Publication date:: January 8, 2021
Edition:: ISO IS 16474 edition 2 version 1
ICS:: 87.040

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

This document specifies methods for exposing coatings to fluorescent UV lamps, heat and water in apparatus designed to reproduce the weathering effects that occur when materials are exposed in actual end-use environments to daylight, or to daylight through window glass. The coatings are exposed to different types of fluorescent UV lamps under controlled environmental conditions (temperature, humidity and/or water). Different types of fluorescent UV lamp can be used to meet all the requirements for testing different materials. Specimen preparation and evaluation of the results are covered in other ISO documents for specific materials. General guidance is given in ISO 16474‑1. NOTE Fluorescent UV lamp exposures for plastics are described in ISO 4892‑3.

Technical details

Technical committee: ISO/TC 35/SC 9 - General test methods for paints and varnishes
SKU: ISO 16474-3:2021

Abstract

Overview

ISO 16474-3:2021 - "Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps" specifies controlled laboratory methods to expose coatings to fluorescent UV lamps, heat and water to reproduce the weathering effects encountered in real end‑use environments (daylight or daylight through window glass). It is part of the ISO 16474 series and complements general guidance in ISO 16474‑1; specimen preparation and result evaluation are covered by other material‑specific ISO documents.

Key topics and technical requirements

Types of fluorescent UV lamps: Defines three lamp types used for simulation:
- Type 1A (UVA‑340) - simulates daylight UV (peak ~343 nm).
- Type 1B (UVA‑351) - simulates daylight transmitted through window glass (peak ~353 nm).
- Type 2 (UVB‑313) - higher short‑wave output (peak ~313 nm); use only by agreement (may emit down to 254 nm).
Controlled environmental variables: UV irradiance, exposure temperature (black‑panel/black‑standard temperatures), chamber relative humidity, condensation or spray wetting cycles.
Measurements and units: Specifies measurement of irradiance (W/m²) and radiant exposure (J/m²) in the specimen plane; recommends radiometer use and irradiance control/maintenance.
Apparatus and instrumentation: Test chamber, fluorescent UV lamps, radiometer, black‑panel/black‑standard thermometer, wetting/humidity systems, specimen holders and equipment for assessing property changes.
Test integrity: Addresses irradiance uniformity, lamp ageing (maintenance or automatic irradiance control), and the need for controls and statistical correlation when comparing results from different lamps or apparatus.
Edition updates: 2021 revision corrected distinctions between black panel and black standard sensors and clarified black‑panel temperature control during water spray.

Applications and who uses it

ISO 16474‑3 is used for accelerated weathering and UV stability testing of paints, varnishes and related coatings. Typical users:

Coatings manufacturers (formulation development, QA/QC)
Independent test laboratories and certification bodies
Automotive, architectural glazing and construction material specifiers
R&D and materials scientists assessing UV durability and coating lifetimes
Procurement/spec writers requiring standardized performance data

Practical uses include accelerated durability screening, verification of UV resistance claims, comparative performance testing of formulations and as part of regulatory or customer‑spec compliance programs.

Related standards

ISO 16474‑1 - General guidance for lab light source exposures
ISO 4892‑3 - Fluorescent UV lamp exposures for plastics
ISO 9370 - Radiant exposure measurement guidance
ISO 1514 / ISO 2808 / ISO 4618 - Panels, film thickness and terminology used in coating testing

Keywords: ISO 16474-3, fluorescent UV lamps, paints and varnishes, accelerated weathering, UV exposure, irradiance, radiant exposure, test chamber, UVA-340, UVA-351, UVB-313.

Related standards

Standards mentioned in the description

Abstract

Overview

Key topics and technical requirements

Types of fluorescent UV lamps: Defines three lamp types used for simulation:
- Type 1A (UVA‑340) - simulates daylight UV (peak ~343 nm).
- Type 1B (UVA‑351) - simulates daylight transmitted through window glass (peak ~353 nm).
- Type 2 (UVB‑313) - higher short‑wave output (peak ~313 nm); use only by agreement (may emit down to 254 nm).
Controlled environmental variables: UV irradiance, exposure temperature (black‑panel/black‑standard temperatures), chamber relative humidity, condensation or spray wetting cycles.
Measurements and units: Specifies measurement of irradiance (W/m²) and radiant exposure (J/m²) in the specimen plane; recommends radiometer use and irradiance control/maintenance.
Apparatus and instrumentation: Test chamber, fluorescent UV lamps, radiometer, black‑panel/black‑standard thermometer, wetting/humidity systems, specimen holders and equipment for assessing property changes.
Test integrity: Addresses irradiance uniformity, lamp ageing (maintenance or automatic irradiance control), and the need for controls and statistical correlation when comparing results from different lamps or apparatus.
Edition updates: 2021 revision corrected distinctions between black panel and black standard sensors and clarified black‑panel temperature control during water spray.

Applications and who uses it

ISO 16474‑3 is used for accelerated weathering and UV stability testing of paints, varnishes and related coatings. Typical users:

Coatings manufacturers (formulation development, QA/QC)
Independent test laboratories and certification bodies
Automotive, architectural glazing and construction material specifiers
R&D and materials scientists assessing UV durability and coating lifetimes
Procurement/spec writers requiring standardized performance data

Related standards

ISO 16474‑1 - General guidance for lab light source exposures
ISO 4892‑3 - Fluorescent UV lamp exposures for plastics
ISO 9370 - Radiant exposure measurement guidance
ISO 1514 / ISO 2808 / ISO 4618 - Panels, film thickness and terminology used in coating testing

Keywords: ISO 16474-3, fluorescent UV lamps, paints and varnishes, accelerated weathering, UV exposure, irradiance, radiant exposure, test chamber, UVA-340, UVA-351, UVB-313.

ISO 16474-3:2021 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Related standards

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment…

Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance (ISO 16474-…

Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 16…

Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2024)

Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic te…

Paints and varnishes - Standard panels for testing (ISO 1514:2024)

Hardmetals - Abrasion tests for hardmetals (ISO 28080:2021)

Paints and varnishes - Vocabulary (ISO 4618:2023)