Overview
ISO 17103:2009 is an international standard developed by the International Organization for Standardization (ISO) that specifies test methods and acceptance criteria for protective skirts used on rotary disc mowers, rotary drum mowers, and flail mowers in agriculture. Protective skirts are critical safety components designed to safeguard operators and bystanders from debris and contact with moving cutting elements. This standard ensures consistent quality, reliability, and safety performance of these skirts through clearly defined mechanical testing procedures.
Key Topics
Test Methods for Protective Skirts
ISO 17103:2009 outlines three essential tests to evaluate the mechanical strength and durability of protective skirts:
-
Tensile Resistance Test:
Measures the ability of the skirt material to withstand tensile (pulling) forces. Samples are taken both horizontally and vertically, subjected to increasing tensile forces. The standard specifies minimum tensile resistance values based on the mower’s cutting element speed:
- ≥ 6,000 N for machines with tip speeds ≤ 90 m/s
- ≥ 8,000 N for machines with tip speeds > 90 m/s
-
Perforation Resistance Test:
Assesses the skirt’s resistance to puncture through a controlled force applied by a punch on a clamped sample. Acceptance criteria include minimum average perforation force and energy required to perforate the material:
- Minimum 2,500 N with 24 N·m energy for speeds ≤ 90 m/s
- Minimum 4,000 N with 30 N·m energy for speeds > 90 m/s
-
Wear Resistance Test:
Evaluates durability by subjecting a skirt sample to abrasive wear over repeated rotations against an abrasive wheel. Success criteria require reinforced skirts not to wear through reinforcement fibers and non-reinforced skirts to retain at least half their original thickness after 10,000 rotations.
Preparation and Testing Protocols
The standard details precise procedures for sample preparation, including dimensions, clamping methods, and testing device specifications. This ensures repeatability and reliability of test results across manufacturers and laboratories.
Applications
ISO 17103:2009 applies primarily to manufacturers, testing laboratories, and quality assurance personnel working with agricultural rotary mowers such as:
- Rotary Disc Mowers: Used for cutting grass and forage crops, where protective skirts mitigate hazards from high-speed cutting disc debris.
- Rotary Drum Mowers: Utilize one or more rotating drums with blades; skirts help contain thrown objects and protect mower components.
- Flail Mowers: Employ multiple small blades or flails; skirts prevent material ejection and promote operator safety.
Complying with ISO 17103 ensures agricultural machinery meets rigorous mechanical safety standards for protective skirts, helping prevent injuries and equipment damage during operation.
Related Standards
Professionals working with ISO 17103:2009 should also be familiar with associated standards referenced within the document, such as:
- ISO 525: Bonded abrasive products - General requirements, relevant to wear testing of protective skirts.
- ISO 845: Cellular plastics and rubbers - Determination of apparent density, applicable to sample preparation and wear test padding.
Moreover, ISO/TC 23/WG SC7 focuses on tractor and agricultural machinery safety standards, providing a broader context for protective device regulations and certification.
Keywords: ISO 17103:2009, agricultural machinery safety, protective skirts, rotary disc mowers, rotary drum mowers, flail mowers, tensile resistance test, perforation resistance test, wear resistance test, agricultural equipment standards, mower safety requirements.
Open preview (PDF)Agricultural machinery — Rotary disc mowers, rotary drum mowers and flail mowers — Test methods and acceptance criteria for protective skirts