Overview
ISO 2827:1988 - Photography - Electronic flash equipment - Determination of light output and performance - is an international standard developed by the International Organization for Standardization (ISO). It outlines the methods and criteria for measuring and evaluating the performance of electronic flash equipment designed for use with photographic cameras. The standard primarily covers single-flash units intended to illuminate photographic scenes, where the camera’s flash contacts are triggered as the shutter fully or nearly fully opens. Ensuring standardized measurement of key performance parameters helps photographers, manufacturers, and testing laboratories to consistently assess and compare flash units.
Key Topics
ISO 2827:1988 specifies measurement procedures and performance standards for the following critical aspects of electronic flash units:
- Light Output: Methods to quantify the total beam light produced by a flash, usually expressed in candela seconds.
- Angle of Coverage: Procedures to determine how wide an area the flash can adequately illuminate, measured through half-angle or specified rectangle for non-circular patterns.
- Ready Indication: Criteria for the visible signal that indicates when a flash is fully recharged and ready for the next exposure.
- Recycle Time: The interval between triggering a flash and its readiness to fire again.
- Number of Flashes: The total number of flash emissions possible from a single set of batteries or a full charge.
- Spectral Energy Distribution: Ensures flash color temperature is suitable for color films, aiming to match photographic daylight for accurate color rendering.
Each of these factors is essential for evaluating the suitability of a flash unit for different photographic applications.
Applications
The practical value of ISO 2827:1988 lies in its application across the photography industry:
- Manufacturers: Use these methods to design and verify flash equipment performance, ensuring products meet consistent international requirements.
- Testing Laboratories: Employ standardized protocols to conduct repeatable, comparable tests on flash units.
- Photographers: Benefit from reliable specifications such as guide numbers, coverage angles, and recycle times, making it easier to select suitable equipment for various situations like studio work, event photography, and general-purpose use.
- Quality Assurance: Supports regulatory and procurement processes by providing clear criteria for verifying flash equipment performance.
- Technical Documentation: Supplies the foundation for user manuals and datasheets, ensuring information such as flash output, recycle times, and coverage is presented in a clear, accurate manner.
Related Standards
ISO 2827:1988 references and complements several other international standards in photography and electronic flash testing, including:
- ISO 1230: Photography - Determination of flash guide numbers.
- ISO 1229: Photography - Expendable photoflash lamps - Determination of light output.
- ISO 3028: Photography - Camera flash illuminants - Determination of ISO spectral distribution index.
- ISO 5763: Photography - Electronic flash equipment - Automatic control of exposure.
Together, these standards form a comprehensive framework for testing, evaluating, and comparing the performance of electronic flash equipment in photography.
Keywords: ISO 2827:1988, electronic flash equipment, photography standards, light output, angle of coverage, recycle time, ready indication, number of flashes, performance testing, photographic flash units.
Open preview (PDF)Photography — Electronic flash equipment — Determination of light output and performance