ISO 3019-2:2001 PDF

Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series

Open preview (PDF)

Title (English):

ISO 3019-2:2001

Hydraulic fluid power — Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors — Part 2: Metric series

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 19
Publication date:: June 21, 2001
Edition:: ISO IS 3019 edition 3 version 1
ICS:: 23.100.10

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

La présente partie de l'ISO 3019 établit une série métrique de flasques de montage et de bouts d'arbres pour pompes volumétriques rotatives et moteurs pour transmissions hydrauliques. Elle spécifie les dimensions et établit un code d'identification des flasques de montage, à deux et à quatre boulons, et polygonaux (circulaires inclus), des bouts d'arbres cylindriques avec clavette, des bouts d'arbres coniques avec clavette et filetage extérieur et des bouts d'arbres à cannelure en développante. NOTE La canelure en développante est conforme à la DIN 5480.

Technical details

Technical committee: ISO/TC 131/SC 2 - Pumps, motors and integral transmissions
SKU: ISO 3019-2:2001

Abstract

Overview

ISO 3019-2:2001 is the International Standard for hydraulic fluid power that establishes a metric series of mounting flanges and shaft ends for positive-displacement rotary pumps and motors. It defines standard sizes, dimensional tolerances, and an identification code so manufacturers and users can achieve dimensional interchangeability and consistent mounting interfaces across products.

Key topics and technical requirements

Scope and types covered
- Metric series for two- and four-bolt, and polygonal (including circular) mounting flanges.
- Shaft end types: cylindrical keyed, conical keyed with external thread, and metric involute spline.
Dimensions and selection
- Standardized spigot diameters (A) and nominal shaft diameters (D) with first/second/non-preferred choices to cover likely requirements.
- Tables and figures (Tables 1–9, Figures 1–6) specify flange/shaft dimensions and compatible spline modules/teeth.
Tolerances and geometric requirements
- Dimensional tolerances follow ISO 286-2; form and positional tolerances follow ISO 1101.
- Concentricity and perpendicularity limits for flange/shaft interfaces are specified; tighter control recommended for rigid couplings.
Keys and splines
- Only parallel or Woodruff keys per ISO 3912 are allowed.
- Metric involute spline parameters reference DIN/ISO conventions (see Table 3 and Figure 6).
Identification code and designation
- Standard code rules for flanges and shaft ends (examples from the standard):
  - Flange: Flange ISO 3019-2 - 100B4HW
  - Shaft end: Shaft end ISO 3019-2 - F32N
  - Combined: Flange and shaft end ISO 3019-2 - 100B4HW - F32N
Sealing guidance
- Annex A (informative) provides examples of sealing methods between flange and housing.

Practical applications and users

Who uses it
- Hydraulic pump and motor manufacturers, OEMs, machine designers, maintenance engineers, procurement/specification teams.
Why it matters
- Ensures mechanical interchangeability for mounting flanges and shaft ends across suppliers.
- Simplifies design, reduces custom adapter needs, and improves spare-parts compatibility.
- Supports reliable sealing arrangements and defined geometric tolerances to prevent undue loads and misalignment.
Typical use cases
- Specifying pump/motor interfaces in mobile and industrial hydraulic systems.
- Cataloguing and ordering replacement units using standardized identification codes.
- Designing mating housings, couplings and shaft couplers to ISO-compatible components.

Related standards

ISO 3019-1 (inch series shown in metric units)
ISO 261 (metric screw threads)
ISO 286-2 (limits and fits)
ISO 1101 (geometrical tolerancing)
ISO 3912 (Woodruff keys and keyways)
ISO 5598 (fluid power vocabulary)

Keywords: ISO 3019-2, hydraulic fluid power, mounting flanges, shaft ends, metric series, identification code, displacement pumps, hydraulic motors, flange dimensions, spline, keyed shaft.

Related standards

Standards mentioned in the description

Abstract

Overview

Key topics and technical requirements

Scope and types covered
- Metric series for two- and four-bolt, and polygonal (including circular) mounting flanges.
- Shaft end types: cylindrical keyed, conical keyed with external thread, and metric involute spline.
Dimensions and selection
- Standardized spigot diameters (A) and nominal shaft diameters (D) with first/second/non-preferred choices to cover likely requirements.
- Tables and figures (Tables 1–9, Figures 1–6) specify flange/shaft dimensions and compatible spline modules/teeth.
Tolerances and geometric requirements
- Dimensional tolerances follow ISO 286-2; form and positional tolerances follow ISO 1101.
- Concentricity and perpendicularity limits for flange/shaft interfaces are specified; tighter control recommended for rigid couplings.
Keys and splines
- Only parallel or Woodruff keys per ISO 3912 are allowed.
- Metric involute spline parameters reference DIN/ISO conventions (see Table 3 and Figure 6).
Identification code and designation
- Standard code rules for flanges and shaft ends (examples from the standard):
  - Flange: Flange ISO 3019-2 - 100B4HW
  - Shaft end: Shaft end ISO 3019-2 - F32N
  - Combined: Flange and shaft end ISO 3019-2 - 100B4HW - F32N
Sealing guidance
- Annex A (informative) provides examples of sealing methods between flange and housing.

Practical applications and users

Who uses it
- Hydraulic pump and motor manufacturers, OEMs, machine designers, maintenance engineers, procurement/specification teams.
Why it matters
- Ensures mechanical interchangeability for mounting flanges and shaft ends across suppliers.
- Simplifies design, reduces custom adapter needs, and improves spare-parts compatibility.
- Supports reliable sealing arrangements and defined geometric tolerances to prevent undue loads and misalignment.
Typical use cases
- Specifying pump/motor interfaces in mobile and industrial hydraulic systems.
- Cataloguing and ordering replacement units using standardized identification codes.
- Designing mating housings, couplings and shaft couplers to ISO-compatible components.

Related standards

ISO 3019-1 (inch series shown in metric units)
ISO 261 (metric screw threads)
ISO 286-2 (limits and fits)
ISO 1101 (geometrical tolerancing)
ISO 3912 (Woodruff keys and keyways)
ISO 5598 (fluid power vocabulary)

Keywords: ISO 3019-2, hydraulic fluid power, mounting flanges, shaft ends, metric series, identification code, displacement pumps, hydraulic motors, flange dimensions, spline, keyed shaft.

ISO 3019-2:2001 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Practical applications and users

Related standards

Related standards

Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of…

Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, locatio…

Woodruff keys and keyways

Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displaceme…

Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displaceme…

Management of terminology resources - Terminology databases - Part 3: Content

Fluid power systems and components — Vocabulary