Overview
ISO 603-7:1999, "Bonded abrasive products - Dimensions - Part 7: Grinding wheels for manually guided grinding," specifies nominal dimensions (in millimetres) and designation rules for grinding wheels intended for manually guided grinding operations. The standard covers a range of wheel types (straight, recessed, cup, disc and cylinder styles) and describes how to identify and mark these bonded abrasive products for safe and consistent use where the workpiece is guided by hand and the wheel is fixed.
Key topics and technical requirements
- Wheel types and dimensions: Defines nominal dimensions for Type 1 (straight), Type 5 (recessed on one side), Type 6 (straight cup), Type 35 (cemented or clamped disc), Type 36 (disc with inserted nuts) and Type 37 (cylinder with inserted nuts). Dimensions are given in millimetres and illustrated with figures and tables.
- Designation: Prescribes the complete designation format including type, dimensions, abrasive nature, grain size, grade, structure, bond type and maximum operating speed (example format provided in the standard).
- Tolerances and run-out: Limit deviations and run-out tolerances are to follow ISO 13942 (referenced).
- Balancing: Static balancing requirements and testing are referenced to ISO 6103.
- Marking and general requirements: Marking and general product requirements are covered by ISO 525; manufacturers are expected to provide marking consistent with that standard.
- Manufacturer specifications: Detailed product specifications (e.g., manufacturing tolerances beyond the dimensional tables) are left to the manufacturer’s discretion, within referenced normative requirements.
Practical applications
ISO 603-7 is used to ensure compatibility, safety and interchangeability of grinding wheels used in off-hand/manual grinding operations. Typical applications include:
- Hand-held grinding and finishing of metal and other materials
- Regrinding and surface treatment where the operator guides the workpiece manually
- Selection and procurement of bonded abrasive products for workshops, maintenance, fabrication and toolrooms
Who uses this standard
- Abrasive product manufacturers and designers - for product dimensioning, marking and catalogue specifications
- Quality control and compliance teams - to verify tolerances, balancing and marking
- Procurement and distributors - for unambiguous product ordering and designation
- Machine shops, maintenance departments and safety officers - to ensure correct wheel selection and safe maximum operating speeds
Related standards
- ISO 525:1999 - Bonded abrasive products - General requirements
- ISO 6103:1999 - Static balancing of grinding wheels - Testing
- ISO 13942 - Limit deviations and run-out tolerances
- Other parts of ISO 603 series (Parts 1–16) and ISO 8486 (grain size determination)
Keywords: ISO 603-7, bonded abrasive products, grinding wheels, manually guided grinding, dimensions, tolerances, balancing, marking.
Open preview (PDF)Bonded abrasive products — Dimensions — Part 7: Grinding wheels for manually guided grinding