ISO 6149-1:2022 PDF

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal

Open preview (PDF)

Title (English):

ISO 6149-1:2022

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 1: Ports with truncated housing for O-ring seal

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 6
Publication date:: June 13, 2022
Edition:: ISO IS 6149 edition 4 version 1
ICS:: 23.100.40

Delivery type:

Full version25 €Read online 24h10 €Read online 72h15 €

Document language:

enru

Delivery time:Immediate download

Price:25 €

Description (English):

This document specifies dimensions for metric ports for use with the adjustable and non-adjustable stud ends as described in ISO 6149‑2 and ISO 6149‑3. Ports in accordance with this document can be used at working pressures up to 63 MPa (630 bar[1]) for non-adjustable stud ends and 40 MPa (400 bar) for adjustable stud ends. The permissible working pressure depends upon port size, materials, design, working conditions, application, etc. See ISO 6149‑2 and ISO 6149‑3 for pressure ratings. NOTE The Introduction of this document gives recommendations for ports and stud ends to be used for new designs in hydraulic fluid power applications. [1] 1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm2.

Technical details

Technical committee: ISO/TC 131/SC 4 - Connectors and similar products and components
SKU: ISO 6149-1:2022

Abstract

Overview

ISO 6149-1:2022 specifies metric ports with truncated housings for O‑ring sealing used in hydraulic fluid power and general-purpose applications. The standard defines port dimensions, identification and designation conventions for ports that mate with ISO 261 metric-thread stud ends (see ISO 6149‑2 and ISO 6149‑3 for stud-end details). Ports conforming to ISO 6149‑1 are suitable for high‑pressure hydraulic systems, with permitted working pressures up to 63 MPa (630 bar) for non‑adjustable stud ends and 40 MPa (400 bar) for adjustable stud ends (actual permissible pressure depends on size, material and application).

Keywords: ISO 6149-1, metric ports, O-ring sealing, hydraulic fluid power, ISO 261, stud ends, port dimensions, hydraulic fittings

Key topics and technical requirements

Port geometry and dimensions: Defines sizes and dimensional limits for metric ports (covers common thread sizes from M8 to M60 as listed in the standard) including spotface, tap depth and counterbore/raised‑boss requirements.
Threading and tolerances: Uses ISO 261 metric threads and tolerance grade 6H in accordance with ISO 965‑1; tap drills per ISO 2306.
O‑ring sealing arrangement: Ports are designed with a truncated housing to accept O‑ring seals for reliable fluid sealing.
Working pressure guidance: Specifies maximum working pressures for use with matching stud ends; notes that allowable pressure depends on port size, material, component design and operating conditions.
Identification and designation: Ports must be identified by a raised ring, a permanent “M” or “metric” marking, or a label referencing ISO 6149‑1:2022; required designation format is described.
Testing and interchangeability: Calls out testing methods and requirements to be performed with stud ends per ISO 6149‑2 and ISO 6149‑3. Includes a clear interchangeability warning about hazards when mixing these ports with older port/stud systems (e.g., ISO 1179, ISO 9974, ISO 11926).

Applications and who uses this standard

Hydraulic system designers and OEMs specifying ports for pumps, motors, valves and cylinders
Component manufacturers (ports, manifold fabricators, valves, cartridge cavities)
System integrators, maintenance and service engineers, and procurement specialists ensuring compatibility and safety
Test laboratories and quality teams performing pressure and leak tests per ISO 6149 series

Benefits include improved interchangeability, predictable sealing performance with O‑rings, and alignment with modern metric thread practices for hydraulic fittings.

Related standards

ISO 6149‑2 (stud ends - heavy‑duty S series)
ISO 6149‑3 (stud ends - light‑duty L series)
ISO 261 / ISO 965‑1 (metric threads and tolerances)
ISO 2306 (tap drills)
Referenced legacy families: ISO 1179, ISO 9974, ISO 11926 (caution advised when mixing systems)

For implementation, consult the full ISO 6149‑1:2022 document and related parts for detailed tables, figures and test procedures.

Related standards

Standards mentioned in the description

Abstract

Overview

Keywords: ISO 6149-1, metric ports, O-ring sealing, hydraulic fluid power, ISO 261, stud ends, port dimensions, hydraulic fittings

Key topics and technical requirements

Port geometry and dimensions: Defines sizes and dimensional limits for metric ports (covers common thread sizes from M8 to M60 as listed in the standard) including spotface, tap depth and counterbore/raised‑boss requirements.
Threading and tolerances: Uses ISO 261 metric threads and tolerance grade 6H in accordance with ISO 965‑1; tap drills per ISO 2306.
O‑ring sealing arrangement: Ports are designed with a truncated housing to accept O‑ring seals for reliable fluid sealing.
Working pressure guidance: Specifies maximum working pressures for use with matching stud ends; notes that allowable pressure depends on port size, material, component design and operating conditions.
Identification and designation: Ports must be identified by a raised ring, a permanent “M” or “metric” marking, or a label referencing ISO 6149‑1:2022; required designation format is described.
Testing and interchangeability: Calls out testing methods and requirements to be performed with stud ends per ISO 6149‑2 and ISO 6149‑3. Includes a clear interchangeability warning about hazards when mixing these ports with older port/stud systems (e.g., ISO 1179, ISO 9974, ISO 11926).

Applications and who uses this standard

Hydraulic system designers and OEMs specifying ports for pumps, motors, valves and cylinders
Component manufacturers (ports, manifold fabricators, valves, cartridge cavities)
System integrators, maintenance and service engineers, and procurement specialists ensuring compatibility and safety
Test laboratories and quality teams performing pressure and leak tests per ISO 6149 series

Benefits include improved interchangeability, predictable sealing performance with O‑rings, and alignment with modern metric thread practices for hydraulic fittings.

Related standards

ISO 6149‑2 (stud ends - heavy‑duty S series)
ISO 6149‑3 (stud ends - light‑duty L series)
ISO 261 / ISO 965‑1 (metric threads and tolerances)
ISO 2306 (tap drills)
Referenced legacy families: ISO 1179, ISO 9974, ISO 11926 (caution advised when mixing systems)

For implementation, consult the full ISO 6149‑1:2022 document and related parts for detailed tables, figures and test procedures.

ISO 6149-1:2022 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Applications and who uses this standard

Related standards

Related standards

Management of terminology resources - Terminology databases - Part 3: Content

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O…

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O…

Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O…

ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data

Foundry machinery - Safety requirements for high pressure die casting machines (ISO 23063:2024)

Connections for general use and fluid power. Ports and stud ends with ISO 228-1 threads with elastomeric or m…