Overview

ISO 6259-2:2020 specifies a standardized method for determining the tensile properties of thermoplastics pipes manufactured from various poly(vinyl chloride) (PVC) materials, including:

Unplasticized poly(vinyl chloride) (PVC-U)
Oriented unplasticized poly(vinyl chloride) (PVC-O)
Chlorinated poly(vinyl chloride) (PVC-C)
High-impact poly(vinyl chloride) (PVC-HI, also designated as PVC-M or PVC-A)

Accurate measurement of tensile properties, such as stress at yield, stress at break, and elongation at break, is critical to ensuring the reliability and quality of PVC-based piping systems for industrial, municipal, and construction applications. ISO 6259-2:2020 builds on the general test principles outlined in ISO 6259‑1 and provides additional material-specific guidance and technical requirements.

Key Topics

ISO 6259-2:2020 covers a range of essential topics, including:

Test Methodology: Describes procedures for sampling, preparing, and conditioning pipe specimens, specifying whether die cutting or machining is required based on pipe wall thickness and material type.
Tensile Properties Measured:
- Stress at yield (the force required to permanently deform the pipe)
- Stress at break (the force the pipe can withstand before failure)
- Elongation at break (how much the pipe can stretch before breaking)
Minimum Performance Requirements: Provides recommended tensile property values for different PVC pipe types via informative annexes, supporting both pressure and non-pressure applications.
Test Reporting: Outlines information to be included in the test report, including individual measurements, arithmetic mean, and standard deviation for stress and elongation properties.
Sampling Criteria: Sets minimum sample numbers depending on pipe diameter, ensuring representative and statistically meaningful results across pipe sizes.

Applications

The standardized test procedures defined in ISO 6259-2:2020 are valuable for:

Quality Control: Enables manufacturers to monitor the mechanical integrity of PVC pipes during production.
Material Type Comparisons: Facilitates reliable comparison between PVC-U, PVC-O, PVC-C, and PVC-HI pipe systems.
Regulatory Compliance: Ensures products meet international mechanical property requirements for diverse fluid transport applications.
Product Development and R&D: Provides a consistent framework for evaluating new PVC pipe formulations or improvements.
Specification and Procurement: Assists project engineers, vendors, and end-users in sourcing and verifying pipes with the required tensile strength and durability.
Certification and Inspection: Supports third-party testing, certification, and inspection for compliance with international standards in construction, water supply, sewage, industrial, and irrigation sectors.

By adhering to ISO 6259-2:2020, stakeholders can improve product reliability, safety, and longevity, promoting confidence in PVC piping solutions worldwide.

Related Standards

ISO 6259-1:2015 - Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3 - Covers tensile testing for other thermoplastic pipe materials
ISO 527-1 & ISO 527-2 - General principles and test conditions for determining the tensile properties of plastics in sheet and moulded forms

ISO 6259-2:2020 complements these foundational standards by providing material-specific procedures for PVC-based pipes, supporting harmonized testing and international market acceptance. For more guidance on the mechanical properties and testing of thermoplastic pipes, these related standards should be consulted alongside ISO 6259-2:2020.

Overview

ISO 6259-2:2020 specifies a standardized method for determining the tensile properties of thermoplastics pipes manufactured from various poly(vinyl chloride) (PVC) materials, including:

Unplasticized poly(vinyl chloride) (PVC-U)
Oriented unplasticized poly(vinyl chloride) (PVC-O)
Chlorinated poly(vinyl chloride) (PVC-C)
High-impact poly(vinyl chloride) (PVC-HI, also designated as PVC-M or PVC-A)

Key Topics

ISO 6259-2:2020 covers a range of essential topics, including:

Test Methodology: Describes procedures for sampling, preparing, and conditioning pipe specimens, specifying whether die cutting or machining is required based on pipe wall thickness and material type.
Tensile Properties Measured:
- Stress at yield (the force required to permanently deform the pipe)
- Stress at break (the force the pipe can withstand before failure)
- Elongation at break (how much the pipe can stretch before breaking)
Minimum Performance Requirements: Provides recommended tensile property values for different PVC pipe types via informative annexes, supporting both pressure and non-pressure applications.
Test Reporting: Outlines information to be included in the test report, including individual measurements, arithmetic mean, and standard deviation for stress and elongation properties.
Sampling Criteria: Sets minimum sample numbers depending on pipe diameter, ensuring representative and statistically meaningful results across pipe sizes.

Applications

The standardized test procedures defined in ISO 6259-2:2020 are valuable for:

Quality Control: Enables manufacturers to monitor the mechanical integrity of PVC pipes during production.
Material Type Comparisons: Facilitates reliable comparison between PVC-U, PVC-O, PVC-C, and PVC-HI pipe systems.
Regulatory Compliance: Ensures products meet international mechanical property requirements for diverse fluid transport applications.
Product Development and R&D: Provides a consistent framework for evaluating new PVC pipe formulations or improvements.
Specification and Procurement: Assists project engineers, vendors, and end-users in sourcing and verifying pipes with the required tensile strength and durability.
Certification and Inspection: Supports third-party testing, certification, and inspection for compliance with international standards in construction, water supply, sewage, industrial, and irrigation sectors.

By adhering to ISO 6259-2:2020, stakeholders can improve product reliability, safety, and longevity, promoting confidence in PVC piping solutions worldwide.

Related Standards

ISO 6259-1:2015 - Thermoplastics pipes - Determination of tensile properties - Part 1: General test method
ISO 6259-3 - Covers tensile testing for other thermoplastic pipe materials
ISO 527-1 & ISO 527-2 - General principles and test conditions for determining the tensile properties of plastics in sheet and moulded forms

ISO 6259-2:2020 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015)

Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015)

Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019)

Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics…