Overview
ISO 6743-9:2003 - "Lubricants, industrial oils and related products (class L) - Classification - Part 9: Family X (Greases)" provides a standardized, condition‑based classification system for greases. It defines a concise designation format for greases used to lubricate machinery, vehicle components and industrial equipment. The standard is intended to be read with ISO 6743-99 (general rules) and helps users choose greases by operating conditions rather than by specific end-use.
Key topics and requirements
- Designation format: Greases are labelled as ISO‑L‑X + five category letters + NLGI number (e.g., ISO‑L‑XBEGB 00). Each letter has a defined meaning and the order is mandatory.
- Operating temperature (Symbols 1 & 2): Two symbols represent the lowest and highest continuous service temperatures (see Table 2). Applicability is determined by low‑temperature flow and high‑temperature life tests.
- Water resistance and corrosion protection (Symbol 3): Combines resistance to water contamination (dry/static/wash) and level of rust protection (none/protective/saltwater), summarized into a single symbol (see Table 3).
- High‑load / Extreme Pressure capability (Symbol 4): Indicates whether the grease has EP/anti‑wear properties (A = no, B = yes) based on four‑ball test methods.
- Consistency / NLGI number: Final digits are the NLGI consistency class (000 to 6) with corresponding worked penetration ranges (ISO 2137) - e.g., NLGI 2 = 265–295 penetration.
- Test methods referenced: Normative and informative test methods include ISO 2137, ISO 11009, ISO 11007, ASTM D2596/D3336, IP 239, DIN methods and others (Annex A explains test linkages).
- Single symbol rule: A grease can have only one symbol set corresponding to the most severe conditions it can withstand.
Applications and users
ISO 6743-9:2003 is practical for:
- Lubricant manufacturers - to classify and label grease products consistently for international markets.
- OEMs and specifiers - to specify grease performance by operating conditions (temperature range, water exposure, load).
- Maintenance engineers and reliability teams - to select compatible greases for bearings, gears, pumps, vehicle components and lubricated systems.
- Procurement and quality labs - to verify product claims using referenced test methods and NLGI classification.
- Standards bodies and consultants - for harmonizing grease specifications in technical documents.
Related standards
- ISO 6743-99 (General rules for class L)
- ISO 2137 (NLGI/worked penetration)
- ISO 11009 / 11007 (water washout / rust prevention)
- ASTM D2596, IP 239 (four‑ball EP tests)
- ISO 12924 (planned specifications for grease properties)
Keywords: ISO 6743-9:2003, grease classification, lubricants, NLGI consistency number, operating temperature, water resistance, extreme pressure (EP), ISO standard.
Open preview (PDF)Lubricants, industrial oils and related products (class L) — Classification — Part 9: Family X (Greases)