Overview

ISO 7616:1986 is an international standard established by the International Organization for Standardization (ISO) that specifies a method for determining the compressive creep behavior of rigid cellular plastics. This method evaluates how these materials deform under a specified compressive load over time and at controlled temperatures. The focus is on testing rigid cellular plastics used primarily for thermal insulation in buildings, ensuring these materials maintain their structural integrity under stress and temperature variations.

The standard outlines procedures for applying load and heat to test specimens, measuring deformation, and calculating creep to provide valuable data on material performance. This test method is essential for manufacturers, engineers, and quality assurance professionals involved in selecting and validating cellular plastic insulation materials.

Key Topics

Test Specimens
- Rectangular parallelepipeds with a square base of 50 mm ±1 mm and thickness of 20 mm minimum (preferably 50 mm).
- Specimens must maintain dimensional accuracy with less than 1% variation and parallel faces.
- Material skins integral to the product are retained for testing.
Test Conditions
- Compressive load applied between two flat plates with minimal lateral movement.
- Testing performed at two conditions:
  - Standard atmosphere: 23 ± 2 °C, 50 ± 5 % relative humidity.
  - Elevated temperature: typically 70 °C or 80 °C for up to 7 days as per predefined test sets.
Measurement & Calculations
- Thickness is measured before load (d1), after applying load at standard conditions for 48 hours (d2), and after load application at elevated temperature for an agreed time (d3).
- Compressive deformation (D₁) and difference in compressive deformation (D₂) are calculated as percentages to quantify creep under specified conditions.
Apparatus
- Dial-gauge micrometer for precise thickness measurement.
- Test chamber maintaining temperature within ± 2 °C.
- Load device with flat compressive plates, capable of maintaining load with less than 5% deviation over the test period.
Reporting Requirements
- Include product description, specimen orientation, thickness, testing conditions, individual and average deformation values.
- Note any unusual specimen behavior affecting results or material performance.

Applications

ISO 7616:1986 is crucial for industries and stakeholders involved with rigid cellular plastics used in thermal insulation, such as:

Building materials manufacturers seeking to ensure product durability under practical load and temperature conditions.
Quality control laboratories validating batch consistency and service life of insulation materials.
Design engineers and architects requiring dependable creep performance data for energy-efficient building envelope solutions.
Research and development teams analyzing the long-term mechanical stability of cellular plastics under aging scenarios involving heat and pressure.

By applying this standardized testing method, manufacturers can better predict the material's behavior in real-world conditions, ensuring safety, performance, and compliance with building codes.

Related Standards

ISO 291 – Plastics: Standard atmospheres for conditioning and testing, providing environmental conditions for specimen preparation.
ISO 1923 – Rigid cellular plastics and rubbers: Determination of linear dimensions, defining specimen size and geometry measurements.
ISO 4898 – Rigid cellular plastics: Specification for materials used in thermal insulation for buildings, setting material requirements.
ISO 7850 – Cellular plastics, rigid: Determination of compressive creep, another relevant standard describing compressive creep testing methods.

Together, these standards form a comprehensive framework for testing and specifying the mechanical and thermal behavior of rigid cellular plastics used for insulation, contributing to reliable performance and energy-efficient building construction.

Keywords: rigid cellular plastics, compressive creep, thermal insulation, ISO 7616, compressive deformation, load testing, temperature effects, plastics testing standard, building insulation materials, mechanical properties of plastics.

Overview

Key Topics

Test Specimens
- Rectangular parallelepipeds with a square base of 50 mm ±1 mm and thickness of 20 mm minimum (preferably 50 mm).
- Specimens must maintain dimensional accuracy with less than 1% variation and parallel faces.
- Material skins integral to the product are retained for testing.
Test Conditions
- Compressive load applied between two flat plates with minimal lateral movement.
- Testing performed at two conditions:
  - Standard atmosphere: 23 ± 2 °C, 50 ± 5 % relative humidity.
  - Elevated temperature: typically 70 °C or 80 °C for up to 7 days as per predefined test sets.
Measurement & Calculations
- Thickness is measured before load (d1), after applying load at standard conditions for 48 hours (d2), and after load application at elevated temperature for an agreed time (d3).
- Compressive deformation (D₁) and difference in compressive deformation (D₂) are calculated as percentages to quantify creep under specified conditions.
Apparatus
- Dial-gauge micrometer for precise thickness measurement.
- Test chamber maintaining temperature within ± 2 °C.
- Load device with flat compressive plates, capable of maintaining load with less than 5% deviation over the test period.
Reporting Requirements
- Include product description, specimen orientation, thickness, testing conditions, individual and average deformation values.
- Note any unusual specimen behavior affecting results or material performance.

Applications

ISO 7616:1986 is crucial for industries and stakeholders involved with rigid cellular plastics used in thermal insulation, such as:

Building materials manufacturers seeking to ensure product durability under practical load and temperature conditions.
Quality control laboratories validating batch consistency and service life of insulation materials.
Design engineers and architects requiring dependable creep performance data for energy-efficient building envelope solutions.
Research and development teams analyzing the long-term mechanical stability of cellular plastics under aging scenarios involving heat and pressure.

By applying this standardized testing method, manufacturers can better predict the material's behavior in real-world conditions, ensuring safety, performance, and compliance with building codes.

Related Standards

ISO 291 – Plastics: Standard atmospheres for conditioning and testing, providing environmental conditions for specimen preparation.
ISO 1923 – Rigid cellular plastics and rubbers: Determination of linear dimensions, defining specimen size and geometry measurements.
ISO 4898 – Rigid cellular plastics: Specification for materials used in thermal insulation for buildings, setting material requirements.
ISO 7850 – Cellular plastics, rigid: Determination of compressive creep, another relevant standard describing compressive creep testing methods.

ISO 7616:1986 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Radiological protection - Sealed radioactive sources - General requirements and classification (ISO 2919:2012)

Cellular plastics and rubbers. Determination of linear dimensions.

Rigid cellular plastics - Thermal insulation products for buildings - Specifications

Cellular plastics, rigid -- Determination of compressive creep

Cellular plastics, rigid -- Determination of compressive creep under specified load and temperature conditions