Overview
ISO 8361-1:1991 sets out a general test method for determining the water absorption of thermoplastics pipes and fittings. Published by the International Organization for Standardization (ISO), this standard provides systematic procedures for evaluating how much water is absorbed by these plastic products when exposed to immersion fluids under specified conditions. The document covers the principle of the test, the types of immersion fluids used, necessary apparatus, test piece preparation, test procedure, expression of results, and the required content for test reports. This general methodology is essential for quality control and product development in industries using thermoplastic piping systems.
Key Topics
- Scope and Purpose: Defines a standardized approach for assessing water absorption in thermoplastics pipes and fittings, ensuring consistency and reliability across laboratories and manufacturers.
- Test Principle: Involves conditioning test pieces, immersing them in distilled water (or other specified fluids), determining their mass before and after immersion, and calculating the increase in mass per unit area.
- Immersion Fluids: Primarily distilled water at controlled temperatures, with references to alternative fluids according to specific material types or product requirements.
- Apparatus:
- High-precision balance (0.1 mg accuracy)
- Thermostatic baths for maintaining controlled immersion temperatures
- Desiccator with silica gel
- Forced-air oven (for some materials)
- Tools for precise dimension measurements (in accordance with ISO 3126)
- Test Samples: Selection and preparation guidelines for pipes (by diameter) and fittings, including detailed instructions to ensure test pieces are representative and reproducible in size and surface condition.
- Results and Reporting: Methods for calculating water absorption, as well as mandatory information for test reports to facilitate traceability and comparability.
Applications
The ISO 8361-1:1991 standard is practically applied in several fields related to plastics engineering and manufacturing:
- Quality Assurance and Compliance: Enables manufacturers of thermoplastics pipes and fittings to verify product consistency, durability, and compliance with industry requirements.
- Product Development and Material Selection: Assists engineers in comparing different thermoplastic compounds and additives based on their water absorption characteristics, which may affect mechanical properties and lifespan.
- End-Use Suitability: Helps end users and specifiers confirm the suitability of thermoplastics pipes and fittings for applications where exposure to moisture is a concern, such as potable water systems, drainage, or chemical processing environments.
- Third-Party Testing and Certification: Testing laboratories and certifying bodies use this standard as a benchmark for impartial evaluation of product performance.
Related Standards
Multiple related ISO standards complement ISO 8361-1:1991 to address specific materials and testing requirements:
- ISO 8361-2:1991 - Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings.
- ISO 8361-3:1991 - Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings.
- ISO 62:1980 - General methods for determination of water absorption in plastics.
- ISO 3126:1974 - Provides guidance for measurement of dimensions for plastics pipes.
By adhering to ISO 8361-1:1991 and its related documents, stakeholders ensure robust, reproducible testing and contribute to the global harmonization of quality standards in the plastics and piping industry.
Open preview (PDF)Thermoplastics pipes and fittings — Water absorption — Part 1: General test method
