This site uses cookies and visit counters for operation and statistics. Privacy policy
Found: 60+
Overview ISO 5467-1:2022 - Dentistry - Mobile dental units and dental patient chairs - Part 1: General requirements defines safety, performance and testing expectations for mobile dental units and mo…
Overview - ISO 5447:1980 ferrosilicomanganese specification ISO 5447:1980 defines the specification and conditions of delivery for ferrosilicomanganese, a ferroalloy typically used in steelmaking and…
Overview ISO 5461:2025 - Space systems: Failure reporting, analysis and corrective action (FRACA) defines requirements and criteria for planning, rating and implementing a FRACA process for space, la…
Overview ISO 5416:2006 specifies a bromine–methanol titrimetric method for the determination of the mass fraction of metallic iron in direct reduced iron (DRI). The procedure is applicable to DRI sam…
Overview ISO 5429:2012 specifies nominal dimensions and limit deviations for coated-abrasive flap wheels with incorporated flanges (version A) or separate flanges (version B) intended for use on stat…
Overview ISO 5445:1980 is an international standard developed by the International Organization for Standardization (ISO) that specifies the requirements and conditions of delivery for ferrosilicon,…
1 Scope This document provides business rules for PH EPR information systems . It includes a description of the EPR information systems domain . It also includes an informative framework for mapping…
1 Scope This part of ISO 5436 defines Type F1 and Type F2 software measurement standards (etalons) for verifying the software of measuring instruments. It also defines the file format of Type F1 soft…
Overview ISO 5444:1978 is an international standard that specifies a precise gravimetric method for determining the loss in mass of sodium fluorosilicate (sodium hexafluorosilicate) when heated at 10…
1 Scope This document provides basic terminology and concepts related to submersibles . It covers 11 aspects of terminology related to submersibles : types, performance, structural system, mechanical…
1 Scope This International Standard specifies dimensions and materials for welding rings and drain screws situated at the bottom of oil and water tanks. Oil and water tanks occur as: - built-in tanks…
Overview ISO 5457:1999/Amd 1:2010 is an important amendment to the international standard ISO 5457:1999, issued by the International Organization for Standardization (ISO). This standard focuses on t…
Overview ISO 5495:2005/Amd 1:2016 is an amendment to the international standard ISO 5495:2005, focusing on sensory analysis methodology-specifically the paired comparison test. This amendment refines…
Overview ISO 5492:2008/Amd 1:2016 is an amendment to ISO 5492:2008 - the international vocabulary for sensory analysis. Rather than prescribing procedures, this amendment expands and clarifies termin…
Overview ISO 5496:2006/Amd 1:2018 is an important amendment to the international standard focused on sensory analysis, specifically targeting the initiation and training of assessors in the detection…
1 Scope This International Standard specifies the dimensions of reduction sleeves with 7/24 external taper No. 30-40-45-50 and 60 and Morse internal taper No. 1 to 6 (Morse taper No. 4, 5 and 6 being…
1 Scope This document in combination with ISO 5474‑1 specifies requirements for conductive power transfer using direct current (DC) with a voltage up to 1 500 V d.c. between electrically propelled ro…
1 Scope This document specifies general requirements for conductive power transfer with a voltage up to 1 000 V a.c. (alternative current) and up to 1 500 V d.c. (direct current) between electrically…
1 Scope This document in combination with ISO 5474‑1 specifies requirements for conductive power transfer using alternating current (AC) with a voltage up to 1 000 V a.c. between electrically-propell…
1 Scope This document provides criteria for planning or rating a failure reporting, analysis and corrective action ( FRACA ) process, with regard to its capability to collect, process, assess, and el…
1 Scope This document defines the requirements and operation of the on-board vehicle equipment that enables magnetic field wireless power transfer (MF-WPT) between supply device and electric vehicles…
Overview ISO 5405:2024 - Audit data collection extension - Government regulated financial reports and payroll - is an ISO standard extension to ISO 21378 that defines a consistent data interface for…
Overview ISO 548:1981 (second edition) defines a barium sulphate gravimetric method for the determination of barium oxide (BaO) content in manganese ores. This International Standard replaces the 197…
Overview ISO 5477:2023 - Health informatics - Interoperability of public health emergency preparedness and response information systems - provides business rules and an informative framework to impro…
Overview ISO 5440:1978 specifies a molybdovanadate spectrophotometric method for the determination of phosphate content in sodium hexafluorosilicate for industrial use. The method is applicable to ph…
Overview ISO 5485:1986 is an international standard established by the International Organization for Standardization (ISO) that specifies the technical requirements and primary dimensions for fixed…
Overview ISO 5412:2022 - Plastics - Industrial compostable plastic shopping bags defines requirements and test methods for plastic shopping bags intended for industrial composting. The standard cover…
Overview ISO 5426:1983 - "Extension of the Latin alphabet coded character set for bibliographic information interchange" defines an extended, coded Latin-character repertoire intended for bibliograph…
Overview ISO 549:1981 specifies a gravimetric analytical method to determine the combined water content (water of constitution) in manganese ores. The method separates water by heating a prepared tes…
Overview ISO 5436-1:2000 - "Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures" specifies the characteristics of material me…
Overview - ISO 5425:2023 for PLA filament (MEX / 3D printing) ISO 5425:2023 specifies requirements and test methods for poly(lactic acid) (PLA) based filament intended for material-extrusion (MEX) ad…
Overview ISO 5401:2024 - "Audit data collection - Customs and indirect tax extension" is an ISO standard that extends ISO 21378 to address audit data needs specific to customs duties and indirect tax…
Overview ISO 5402-2:2015 is an international standard specifying a precise method for determining the flex resistance of leather materials and their finishes using the vamp flex method. Applicable to…
Overview ISO 5456-1:1996 - Technical drawings - Projection methods - Part 1: Synopsis - is the first edition (1996) of the ISO synopsis that surveys the various projection systems used in technical d…
Overview ISO 5415:2007 specifies dimensions and basic requirements for reduction sleeves with a 7/24 external taper and a Morse internal taper that include an incorporated screw. The standard covers…
Overview ISO 5418-2:2006 specifies a flame atomic absorption spectrometric (AAS) method for the determination of the mass fraction of copper (Cu) in iron ores. It applies to natural iron ores, concen…
Overview ISO 540:2008 - Hard coal and coke - Determination of ash fusibility - specifies a laboratory method to determine the characteristic fusion temperatures of ash produced from hard coal and cok…
Overview ISO 5454:1980 - "Ferrotitanium - Specification and conditions of delivery" defines the requirements for ferrotitanium usually supplied for steelmaking and foundry use. The standard covers pr…
