Overview

SIST EN ISO 10414-2:2011 (ISO 10414-2:2011) specifies field test methods for oil-based drilling fluids used in the petroleum and natural gas industries. This international standard provides harmonized, rig-site procedures for measuring key fluid properties - enabling consistent, repeatable assessments of oil-based mud performance and composition. ISO 10414-2 is the second edition (2011), aligned with EN adoption and based on API RP 13B-2.

Key topics and technical requirements

The standard defines procedures and calculations for core field tests and analyses, including:

Drilling fluid density (mud weight) - field determination methods and alternative procedures.
Viscosity and gel strength - Marsh funnel and direct-reading viscometer techniques.
Static filtration - high-temperature/high-pressure (HT/HP) filtration testing (methods covering up to and including 230 °C).
Retort test for oil, water and solids concentrations - volumetric and gravimetric retort procedures and calculations.
Chemical analyses - alkalinity (base demand and whole-fluid), chloride and calcium concentrations.
Electrical stability - assessing emulsion robustness and phase separation tendencies.
Calculations - lime, salinity, soluble/insoluble salts, low-gravity solids and weighting-material concentrations.

Informative annexes provide optional or supplementary methods and examples for:

Shear strength measurement, oil/water on cuttings, aniline point, rig-site sampling and sampling inspection, cuttings activity, active sulfides analysis, calibration/verification of glassware and equipment.
HT/HP filtration using permeability plugging apparatus (cells with set-screw or threaded end caps), elastomer compatibility, sand content determination, identification/monitoring of weight-material sag, and an oil-based drilling fluid report form.

Practical applications and who uses this standard

ISO 10414-2 is intended for:

Field engineers and drilling-fluid specialists conducting rig-site testing and troubleshooting of oil-based mud systems.
Service companies and lab technicians responsible for rapid, standardized mud property measurements (density, viscosity, filtration, chemical composition).
Quality assurance, operations managers, and regulators requiring consistent reporting and verification of drilling fluid condition and environmental compliance.
R&D teams evaluating new base oils, additives, or elastomer compatibility under field-relevant conditions.

Use cases include monitoring mud stability, detecting contamination, assessing emulsion integrity, optimizing hydraulics and solids control, and documenting fluid condition in wellbore operations.

Related standards

ISO 10414-1 - Field testing of water-based fluids
API RP 13B-2 - Recommended practice for field testing of oil-based drilling fluids (basis for ISO 10414-2)

Keywords: ISO 10414-2, oil-based drilling fluids, field testing, mud weight, viscosity, HT/HP filtration, retort test, electrical stability, rig-site sampling.

Overview

Key topics and technical requirements

The standard defines procedures and calculations for core field tests and analyses, including:

Drilling fluid density (mud weight) - field determination methods and alternative procedures.
Viscosity and gel strength - Marsh funnel and direct-reading viscometer techniques.
Static filtration - high-temperature/high-pressure (HT/HP) filtration testing (methods covering up to and including 230 °C).
Retort test for oil, water and solids concentrations - volumetric and gravimetric retort procedures and calculations.
Chemical analyses - alkalinity (base demand and whole-fluid), chloride and calcium concentrations.
Electrical stability - assessing emulsion robustness and phase separation tendencies.
Calculations - lime, salinity, soluble/insoluble salts, low-gravity solids and weighting-material concentrations.

Informative annexes provide optional or supplementary methods and examples for:

Shear strength measurement, oil/water on cuttings, aniline point, rig-site sampling and sampling inspection, cuttings activity, active sulfides analysis, calibration/verification of glassware and equipment.
HT/HP filtration using permeability plugging apparatus (cells with set-screw or threaded end caps), elastomer compatibility, sand content determination, identification/monitoring of weight-material sag, and an oil-based drilling fluid report form.

Practical applications and who uses this standard

ISO 10414-2 is intended for:

Field engineers and drilling-fluid specialists conducting rig-site testing and troubleshooting of oil-based mud systems.
Service companies and lab technicians responsible for rapid, standardized mud property measurements (density, viscosity, filtration, chemical composition).
Quality assurance, operations managers, and regulators requiring consistent reporting and verification of drilling fluid condition and environmental compliance.
R&D teams evaluating new base oils, additives, or elastomer compatibility under field-relevant conditions.

Use cases include monitoring mud stability, detecting contamination, assessing emulsion integrity, optimizing hydraulics and solids control, and documenting fluid condition in wellbore operations.

Related standards

ISO 10414-1 - Field testing of water-based fluids
API RP 13B-2 - Recommended practice for field testing of oil-based drilling fluids (basis for ISO 10414-2)

Keywords: ISO 10414-2, oil-based drilling fluids, field testing, mud weight, viscosity, HT/HP filtration, retort test, electrical stability, rig-site sampling.

SIST EN ISO 10414-2:2011 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Practical applications and who uses this standard

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Practical applications and who uses this standard

Related standards

Related standards

Petroleum and natural gas industries — Field testing of drilling fluids — Part 2: Oil-based fluids

Petroleum and natural gas industries - Field testing of drilling fluids - Part 1: Water-based fluids (ISO 104…

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…