Overview
EN ISO 14509-3:2018 (ISO 14509-3:2009 endorsed by CEN) specifies a hybrid sound assessment method for airborne noise from powered monohull recreational craft. The standard applies to craft up to 24 m in hull length with a Froude number (Fn) > 1.1 and excludes personal watercraft (PWC). It combines a calculation method for hull‑form noise with an on‑board measurement of exhaust/engine contributions to predict the A‑weighted sound pressure level (LpAmax) that would be observed at 25 m (pass‑by equivalent).
This method was developed from the SoundBoat project and provides a reproducible alternative to ISO 14509‑1 pass‑by testing that is independent of location and many weather constraints.
Key Topics
- Scope & limits
- Monohull recreational craft, length ≤ 24 m, Fn > 1.1; not for PWC.
- Note: SoundBoat validation focused on craft with up to two chines, square transoms and hull length ≥ 11 m.
- Hybrid assessment approach
- Hull‑form sound is calculated from hull parameters (Annex A).
- On‑board sound is measured at source (Annex B) and corrected for propagation to a 25 m reference.
- Results are combined (logarithmic summation) to estimate the maximum A‑weighted sound pressure level.
- Performance
- Predicted LpAmax is stated to be within ±2 dB of ISO 14509‑1 pass‑by measurements (accounting for measurement uncertainties).
- Reporting & test data
- Test report requirements and example forms are provided (Annex C).
- Normative references
Applications
Who uses this standard and why:
- Boat manufacturers and OEMs - demonstrate conformity with noise emission requirements and support CE marking under EU Directive 2013/53/EU.
- Acoustic test laboratories and marine consultants - perform reproducible noise assessments without full pass‑by setups.
- Regulatory authorities and compliance engineers - evaluate conformity to recreational craft noise limits.
- Naval architects and design teams - use hull‑form noise predictions during design and noise‑control optimization.
Key benefits:
- Testing independent of a dedicated pass‑by site and some weather constraints.
- Reproducible assessment comparable to pass‑by measurements.
- Practical for early design validation and production conformity checks.
Related Standards
Keywords: EN ISO 14509-3:2018, small craft noise, airborne sound, powered recreational craft, sound assessment, A‑weighted sound pressure level, calculation and measurement, marine noise compliance.
