Overview
SIST EN ISO 15147:2013 is an international standard developed by ISO and adopted by CEN that specifies the methods for measuring widths and lengths of cut light conveyor belts, as defined in ISO 21183-1. The standard also sets forth tolerances applicable to these dimensions to ensure quality and compatibility in conveyor belt manufacturing and application. This standard replaces the earlier 1999 edition and applies to light conveyor belts used across various industrial sectors.
Key Topics
-
Measurement Methods
The standard describes precise procedures for determining the widths and lengths of cut light conveyor belts. It covers:
- Width measurement at three equidistant points along the belt's length using appropriate linear measurement tools.
- Length measurement for:
- Endless belts and open-ended belts prepared for splicing-calculated by summing individual flat-length segments and adjusted for belt thickness.
- Open-ended belts not prepared for splicing (slab belting)-measured via mechanical or electromechanical linear measurement methods ensuring no tension is applied.
-
Tolerances on Dimensions
SIST EN ISO 15147:2013 defines specific tolerance limits to account for manufacturing variability:
- Width tolerances vary depending on the belt width range and the material’s moisture absorption properties (e.g., polyester vs. cotton or polyamide).
- Length tolerances differ based on belt type, with tolerances provided for endless belts, open-ended belts prepared for splicing, and slab belting.
- Typical width tolerances range from ±1 mm for narrow belts (below 200 mm) up to ±8 mm or 0.3% of width for very wide belts (above 4,000 mm).
- Length tolerances include fixed millimeter values for shorter belts and percentage tolerances for longer belts.
-
Applicability and Standards Integration
The standard is consistent with ISO 21183-1, which defines principal characteristics and applications of light conveyor belts. It ensures harmonization across national standards within CEN member countries.
Applications
SIST EN ISO 15147:2013 is essential for manufacturers, suppliers, and users of light conveyor belts in industries including:
-
Material Handling and Packaging
Ensuring conveyor belts fit precisely in machinery reduces downtime and improves efficiency. Accurate dimensional control helps maintain consistent belt performance.
-
Food and Pharmaceutical Processing
Compliance with dimensional tolerances ensures hygienic and safe conveyor belt operation with minimal risk of mechanical failure during product transport.
-
Automotive and Electronics Assembly Lines
Precision belt sizing supports high-speed production lines where exact conveyor performance is critical for quality and timing.
-
Logistics and Warehousing Systems
Standardized belt dimensions allow easy integration into modular conveyor systems and facilitate maintenance and belt replacement.
Related Standards
-
ISO 21183-1: Light Conveyor Belts - Principal Characteristics and Applications
Sets out the primary properties and appropriate industrial uses of light conveyor belts, providing foundational context for SIST EN ISO 15147:2013.
-
ISO/TC 41 Technical Committee on Pulleys and Belts
Oversees development of standards related to belt and pulley systems, ensuring EN ISO 15147 aligns with broader conveyor technology standards.
-
EN ISO 15147:1999
The previous version of this standard, revised by the 2012 edition to update measurement methods and tolerances with improved clarity and consistency.
SIST EN ISO 15147:2013 offers a reliable, industry-recognized framework for measuring and specifying dimensional tolerances on light conveyor belts, supporting quality assurance, efficient conveyor design, and interoperability across European and international markets. Compliance helps manufacturers minimize errors, optimize material usage, and ensure customer satisfaction through consistent product quality.
