Overview
EN ISO 15792-1:2020 (ISO 15792-1:2020) - "Welding consumables - Test methods - Part 1: Preparation of all-weld metal test pieces and specimens in steel, nickel and nickel alloys" - is a CEN-endorsed standard that specifies how to prepare test pieces and specimens for determining the mechanical properties of all‑weld metal produced by welding consumables in arc welding. It covers preparation, welding conditions, heat treatment and specimen extraction for steel, nickel and nickel alloys. This part does not apply to single- or two‑run welding or fillet welding (see ISO 15792‑2 and ISO 15792‑3).
Key Topics and Requirements
- Scope and purpose: Defines preparation of all‑weld metal test pieces used for consumable classification and other mechanical tests in arc welding of steel, nickel and nickel alloys.
- Test piece design: Test pieces are prepared as a single V‑groove on a backing strip; the backing strip is tack welded on the reverse side. Plates must be pre-set or restrained so the welded piece is sufficiently flat for specimen extraction.
- Test plate material: Plate material must be compatible with the weld metal or the groove edges/backing can be built up using at least two layers of the consumable under test.
- Welding conditions: Welding is performed in the flat position unless a consumable is designed exclusively for another position. Preheat and interpass temperatures and welding parameters (current, voltage, travel speed, run sequence, bead size) follow the relevant consumable classification standard. Temperature measurement may follow ISO 13916 methods.
- Heat treatment: All required heat treatments (except hydrogen removal) are carried out on the test piece or sections with machining allowance. Hydrogen removal treatment for tensile testing may be done at ≤250 °C for up to 16 h.
- Specimen location and dimensions:
- Tensile specimens per ISO 5178; diameter 8 mm for certain small test piece types (1.0 & 1.1), otherwise 10 mm.
- Notched impact specimens per ISO 9016 (designation VWT 0/b), size 10 mm × 10 mm, located at the midline of plate thickness.
- Thermal cutting requires at least 10 mm machining allowance each side.
Applications - Who Uses This Standard
- Welding consumable manufacturers for product classification and certification testing.
- Independent testing laboratories and certification bodies performing mechanical testing of all‑weld metal.
- Welding engineers, QC/QA managers and metallurgists implementing standard test methods to ensure reproducible evaluation of consumables.
- Product development teams comparing mechanical performance of filler metals in steel, nickel and nickel alloys.
Related Standards
Keywords: welding consumables, test methods, all-weld metal, test pieces, specimens, ISO 15792-1:2020, EN ISO 15792-1, steel, nickel alloys, welding test preparation.
