SIST EN ISO 22818:2021 PDF

Textiles - Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (MCCP) in textile products out of different matrices by use of gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS) (ISO 22818:2021)

Title (English):

SIST EN ISO 22818:2021

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 23
Publication date:: April 29, 2021
ICS:: 59.080.01
Technical committee:: ITEK - Textile and textile products

Document language:

enru

Delivery time:1–7 days

Price:74 €

Description (English):

This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).

Technical details

SKU: SIST EN ISO 22818:2021

Abstract

Overview

EN ISO 22818:2021 specifies a chromatographic method for the determination of short-chain chlorinated paraffins (SCCP, C10–C13) and middle-chain chlorinated paraffins (MCCP, C14–C17) in textile products. The method targets a range of textile matrices - especially polymers in coated fabrics, polymer-based prints and polymer buttons (e.g., PVC) - using solvent extraction followed by gas chromatography negative ion chemical ionization mass spectrometry (GC‑NCI‑MS). The standard provides a reproducible procedure and defined calibration approach for comparable SCCP and MCCP results.

Key Topics and Requirements

Scope and targets: SCCPs (C10–C13) and MCCPs (C14–C17) in textile articles.
Sample preparation: Solvent extraction (toluene indicated in the method) and sulfuric acid clean-up to remove interferences prior to analysis.
Analytical technique: GC‑NCI‑MS with a defined calibration standard; the method uses multiple ion traces (four for SCCP and four for MCCP) to address complex mixtures.
Calibration: Calibration uses typical chlorination degrees of technical mixtures (SCCP ~59% Cl; MCCP ~55% Cl) to improve comparability.
Expression of results and QA: Procedures for calibration, evaluation, recovery determination of internal standards, interference checks and reporting of results are included.
Regulatory context: SCCPs are listed under the Stockholm Convention and are restricted in the EU (REGULATION (EU) 2019/1021); the standard supports compliance testing (articles with SCCP

Related standards

Mentioned in the description and other SIST standards

Overview

Key Topics and Requirements

Scope and targets: SCCPs (C10–C13) and MCCPs (C14–C17) in textile articles.
Sample preparation: Solvent extraction (toluene indicated in the method) and sulfuric acid clean-up to remove interferences prior to analysis.
Analytical technique: GC‑NCI‑MS with a defined calibration standard; the method uses multiple ion traces (four for SCCP and four for MCCP) to address complex mixtures.
Calibration: Calibration uses typical chlorination degrees of technical mixtures (SCCP ~59% Cl; MCCP ~55% Cl) to improve comparability.
Expression of results and QA: Procedures for calibration, evaluation, recovery determination of internal standards, interference checks and reporting of results are included.
Regulatory context: SCCPs are listed under the Stockholm Convention and are restricted in the EU (REGULATION (EU) 2019/1021); the standard supports compliance testing (articles with SCCP

SIST EN ISO 22818:2021 PDF

Technical details

Abstract

Overview

Key Topics and Requirements

Related standards

Abstract

Overview

Key Topics and Requirements

Related standards

Textiles — Determination of short-chain chlorinated paraffins (SCCP) and middle-chain chlorinated paraffins (…

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…