SIST EN ISO 6179:2017 PDF

Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)

Title (English):

SIST EN ISO 6179:2017

Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 16
Publication date:: October 6, 2017
ICS:: 59.080.40
Technical committee:: ITEK - Textile and textile products

Document language:

enru

Delivery time:1–7 days

Price:60 €

Description (English):

ISO 6179:2017 specifies two methods for determining, by measurement of the transmission rate, the permeability of rubber to volatile liquids diffusing into open air. It is applicable only to materials in sheet form and to coated fabrics having thicknesses between 0,2 mm and 3,0 mm. It is restricted to transmission rates of more than 0,1 g/m2·h. The methods are particularly useful for comparing the relative transmission rates of one liquid through different materials, or of several liquids through one material. Method A, with refilling, is used when testing mixtures of liquids which give different transmission rates. Method B, with no refilling, is used for a single-component liquid. NOTE A method for the determination of water vapour transmission rate is given in ISO 2528.

Technical details

SKU: SIST EN ISO 6179:2017

Abstract

Overview

EN ISO 6179:2017 (ISO 6179:2017) specifies a gravimetric technique for determining the transmission rate of volatile liquids through rubber (vulcanized or thermoplastic) sheets and rubber‑coated fabrics. Adopted by CEN in August 2017, this standard defines two test methods (Method A and Method B) to measure permeability by weight loss and is intended for materials in sheet form with thicknesses from 0.2 mm to 3.0 mm. Results are expressed in grams per square metre per hour (g/m2·h) and the procedure applies to transmission rates greater than 0.1 g/m2·h.

Key topics and technical requirements

Scope and limits: Applies only to sheet materials and coated fabrics (0.2–3.0 mm); excludes water‑vapour testing (see ISO 2528).
Two test methods:
- Method A (with refilling) - for mixtures of liquids that evaporate at different rates.
- Method B (no refilling) - for single‑component liquids.
Gravimetric technique: Measures mass loss of a liquid reservoir behind the test piece; transmission rate calculated from mass change over area and time.
Apparatus and accuracy:
- Container assembly with inlet valve (60–100 cm3) and clamping device.
- Balance with ≥200 g capacity and 1 mg readability.
- Optional cabinet oven for elevated temperature tests.
Test piece preparation: Circular specimens cut and conditioned per ISO 23529; thickness measured and documented.
Calibration and quality: Calibration schedule provided (Annex A); references include ISO 188, ISO 2231, ISO 2286‑3, ISO 3310‑1.
Test conditions: Specified temperature, duration, conditioning, and support (wire mesh for high rates or no fabric).

Applications and who uses it

Quality control and acceptance testing in rubber and coated‑fabric manufacturing.
Material selection and R&D to compare relative permeability of different rubbers or different liquids through one material.
Industry sectors: automotive (hoses, seals), protective equipment (gloves, suits), hoses and gaskets, chemical containment, and any application where resistance to volatile solvents is critical.
Users: test laboratories, QC engineers, product developers, procurement/specification writers, and conformity assessors.

Related standards

ISO 2528 - water vapour transmission rate (different scope).
ISO 23529 - preparation and conditioning of rubber test pieces.
ISO 188, ISO 2231, ISO 2286‑3, ISO 3310‑1 - referenced for calibration, atmospheres, thickness measurement and test sieves.

EN ISO 6179:2017 is the authoritative method for gravimetric measurement of volatile‑liquid permeation through rubber sheets and rubber‑coated fabrics, providing a standardized basis for comparative testing, specification writing, and product compliance.

Related standards

Other SIST standards

Abstract

Overview

Key topics and technical requirements

Scope and limits: Applies only to sheet materials and coated fabrics (0.2–3.0 mm); excludes water‑vapour testing (see ISO 2528).
Two test methods:
- Method A (with refilling) - for mixtures of liquids that evaporate at different rates.
- Method B (no refilling) - for single‑component liquids.
Gravimetric technique: Measures mass loss of a liquid reservoir behind the test piece; transmission rate calculated from mass change over area and time.
Apparatus and accuracy:
- Container assembly with inlet valve (60–100 cm3) and clamping device.
- Balance with ≥200 g capacity and 1 mg readability.
- Optional cabinet oven for elevated temperature tests.
Test piece preparation: Circular specimens cut and conditioned per ISO 23529; thickness measured and documented.
Calibration and quality: Calibration schedule provided (Annex A); references include ISO 188, ISO 2231, ISO 2286‑3, ISO 3310‑1.
Test conditions: Specified temperature, duration, conditioning, and support (wire mesh for high rates or no fabric).

Applications and who uses it

Quality control and acceptance testing in rubber and coated‑fabric manufacturing.
Material selection and R&D to compare relative permeability of different rubbers or different liquids through one material.
Industry sectors: automotive (hoses, seals), protective equipment (gloves, suits), hoses and gaskets, chemical containment, and any application where resistance to volatile solvents is critical.
Users: test laboratories, QC engineers, product developers, procurement/specification writers, and conformity assessors.

Related standards

ISO 2528 - water vapour transmission rate (different scope).
ISO 23529 - preparation and conditioning of rubber test pieces.
ISO 188, ISO 2231, ISO 2286‑3, ISO 3310‑1 - referenced for calibration, atmospheres, thickness measurement and test sieves.

SIST EN ISO 6179:2017 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Related standards

Abstract

Overview

Key topics and technical requirements

Applications and who uses it

Related standards

Related standards

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…

Dentistry - Powered polymerization activators (ISO 10650:2026)