SIST EN ISO 7823-2:2003 PDF

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)

Title (English):

SIST EN ISO 7823-2:2003

Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 15
Publication date:: December 1, 2003
ICS:: 83.140.10
Technical committee:: IPMA - Polimer materials and products

Document language:

enru

Delivery time:1–7 days

Price:60 €

Description (English):

ISO 7823-2:2003 specifies requirements for flat poly(methyl methacrylate) (PMMA) sheets extruded from colourless or coloured, transparent, translucent or opaque materials. The thickness range of the sheets covered by this part of ISO 7823 is 1,5 mm to 20 mm.

Technical details

SKU: SIST EN ISO 7823-2:2003

Abstract

Overview

EN ISO 7823-2:2003 (ISO 7823-2:2003) specifies requirements for flat poly(methyl methacrylate) (PMMA) extruded sheets. It covers sheets made from colourless or coloured, transparent, translucent or opaque PMMA and applies to thicknesses from 1.5 mm to 20 mm. The standard defines appearance, dimensional tolerances, surface and inclusion defect limits, protective coverings, and test methods (with normative references) to ensure consistent quality of extruded PMMA sheet products.

Key topics and technical requirements

Scope and sheet types: Flat PMMA extruded sheets (homopolymers and copolymers of MMA with ≥80% MMA).
Thickness range: 1.5 mm to 20 mm.
Protective coverings: Surfaces should be delivered protected (eg. kraft paper or polyethylene film) and removable without surface damage.
Appearance and defects:
- Surface defects must not exceed 4 mm each.
- Inclusions (bubbles, foreign matter) must not exceed 2 mm each.
- Defect classification: negligible, acceptable (specific area thresholds provided in the standard).
- Distribution rules: limits on numbers and proximity of defects (e.g., acceptable defects must be at least 500 mm apart).
Dimensions and tolerances:
- Length/width tolerances for cut sheets (examples: up to 1 000 mm: +3/0 mm; 1 001–2 000 mm: +6/0 mm; 2 001–3 000 mm: +9/0 mm; ≥3 001 mm: +0.3%/0).
- Thickness tolerances: ±10% for 1.5–

Related standards

Mentioned in the description and other SIST standards

Overview

Key topics and technical requirements

Scope and sheet types: Flat PMMA extruded sheets (homopolymers and copolymers of MMA with ≥80% MMA).
Thickness range: 1.5 mm to 20 mm.
Protective coverings: Surfaces should be delivered protected (eg. kraft paper or polyethylene film) and removable without surface damage.
Appearance and defects:
- Surface defects must not exceed 4 mm each.
- Inclusions (bubbles, foreign matter) must not exceed 2 mm each.
- Defect classification: negligible, acceptable (specific area thresholds provided in the standard).
- Distribution rules: limits on numbers and proximity of defects (e.g., acceptable defects must be at least 500 mm apart).
Dimensions and tolerances:
- Length/width tolerances for cut sheets (examples: up to 1 000 mm: +3/0 mm; 1 001–2 000 mm: +6/0 mm; 2 001–3 000 mm: +9/0 mm; ≥3 001 mm: +0.3%/0).
- Thickness tolerances: ±10% for 1.5–

SIST EN ISO 7823-2:2003 PDF

Technical details

Abstract

Overview

Key topics and technical requirements

Related standards

Abstract

Overview

Key topics and technical requirements

Related standards

Plastics — Poly(methyl methacrylate) sheets — Types, dimensions and characteristics — Part 2: Extruded sheets

Method to calculate GHG emissions at LNG plant (ISO 6338:2023)

Additive manufacturing of metals - Powder bed fusion (PBF) - In-situ coaxial photodiode monitoring for lack o…

Facility management - Development of the facility management organization (ISO 41002:2026)

Rigid cellular plastics - Determination of compressive properties (ISO 844:2026)

Processing of health care products - Information to be provided by the medical device manufacturer for the pr…

Ophthalmic optics - Uncut finished spectacle lenses - Part 4: Specifications and test methods for the propert…

Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Amendment 1: Reinstatement of third e…