SIST EN ISO 8846:2026 PDF

Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:2025)

Title (English):

SIST EN ISO 8846:2026

Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:2025)

Document status:: Active
Format:: Electronic (PDF)
Number of pages:: 16
Publication date:: March 25, 2026
Edition:: ISO 8846:2025
ICS:: 13.220.20

Document language:

enru

Delivery time:1–7 days

Price:60 €

Description (English):

This document specifies test methods and requirements for the design of electrical devices, when under normal operating conditions, on small craft so that they can be operated without igniting a surrounding flammable gas atmosphere. This document does not apply to ignition protection procedures for: — devices or components that can operate in hydrogen and air mixtures; — devices with dysfunctional issues; — mechanisms of ignition from external sources, such as static electricity, lightning or other factors not related to the equipment under test.

Technical details

Technical committee: I13 - Imaginarni 13
SKU: SIST EN ISO 8846:2026

Abstract

Overview

SIST EN ISO 8846:2026 sets out test methods and requirements to ensure that electrical devices on small craft operate safely in environments where flammable gases may be present. Developed by CEN in collaboration with ISO, this European Standard focuses on minimizing the risk of ignition from onboard electrical equipment, especially in areas like engine compartments and fuel tank spaces. By applying these requirements, manufacturers can ensure compliance with safety obligations, particularly those outlined in EU Directive 2013/53/EU related to recreational craft.

The standard is relevant to electrical equipment installed on small craft - boats and vessels up to 24 meters in length. It specifies requirements for devices during normal use, excluding special cases such as hydrogen atmospheres, equipment malfunction, or ignition from external sources like lightning.

Key Topics

Scope of Application
- Applies to electrical devices in small craft subject to flammable hydrocarbon gas atmospheres.
- Focuses on protection against ignition caused by external device temperatures or internal electrical arcs.
- Excludes protection for hydrogen environments, devices with known faults, and ignition from static or lightning.
Design and Testing Requirements
- Devices must not ignite surrounding flammable gas under normal operating conditions.
- Requirements address both sealed and non-sealed devices, with specific test methods for each.
- Surface temperature tests ensure components do not exceed safe external temperatures.
- For sealed devices, integrity is verified by submersion tests to check for ingress.
- Non-sealed devices undergo chamber tests simulating gas exposure and potential ignition events.
Identification and Labeling
- Compliant products must display the marking “ISO 8846 MARINE” or “Ignition Protected”, with durable labeling suitable for harsh marine conditions.

Applications

Marine Electrical Equipment Manufacturing
- Critical for manufacturers of starters, alternators, pumps, switches, and circuit breakers designed for use in motorboats, yachts, and other small craft.
- Assists in risk evaluations during product design and safety assurance processes.
System Integrators and Boat Builders
- Essential guidance for selection and installation of electrical systems where flammable gases could accumulate (e.g., petrol engine compartments, LPG gas lockers).
- Facilitates selection of components that comply with both safety best practices and legal requirements.
Regulatory Compliance
- Supports compliance with EU legislation for recreational craft, notably Directive 2013/53/EU.
- Contributes to CE marking and declaration of conformity processes for marine products.

Related Standards

ISO 8666 - Small craft – Principal data: Referenced for definitions and measures related to craft size.
IEC 60079-0 - Explosive atmospheres – Equipment general requirements: Provides complementary requirements for explosion-protection in broader industrial contexts.
EN ISO 10133 - Small craft – Electrical systems – Extra-low-voltage DC installations: Focuses on the broader safety of DC electrical installations.
EN ISO 13297 - Small craft – Electrical systems – AC installations: Addresses AC systems, potentially relevant for vessels with such setups.

Keywords: small craft, marine electrical devices, ignition protection, flammable gases, boat safety, SIST EN ISO 8846:2026, ISO 8846:2025, marine equipment standards, Directive 2013/53/EU compliance

By rigorously applying SIST EN ISO 8846:2026, stakeholders in the design, production, and commissioning of small craft can significantly reduce fire and explosion risks associated with onboard electrical equipment, thereby ensuring safer marine environments for both commercial and recreational users.

Related standards

Standards mentioned in the description

Abstract

Overview

Key Topics

Scope of Application
- Applies to electrical devices in small craft subject to flammable hydrocarbon gas atmospheres.
- Focuses on protection against ignition caused by external device temperatures or internal electrical arcs.
- Excludes protection for hydrogen environments, devices with known faults, and ignition from static or lightning.
Design and Testing Requirements
- Devices must not ignite surrounding flammable gas under normal operating conditions.
- Requirements address both sealed and non-sealed devices, with specific test methods for each.
- Surface temperature tests ensure components do not exceed safe external temperatures.
- For sealed devices, integrity is verified by submersion tests to check for ingress.
- Non-sealed devices undergo chamber tests simulating gas exposure and potential ignition events.
Identification and Labeling
- Compliant products must display the marking “ISO 8846 MARINE” or “Ignition Protected”, with durable labeling suitable for harsh marine conditions.

Applications

Marine Electrical Equipment Manufacturing
- Critical for manufacturers of starters, alternators, pumps, switches, and circuit breakers designed for use in motorboats, yachts, and other small craft.
- Assists in risk evaluations during product design and safety assurance processes.
System Integrators and Boat Builders
- Essential guidance for selection and installation of electrical systems where flammable gases could accumulate (e.g., petrol engine compartments, LPG gas lockers).
- Facilitates selection of components that comply with both safety best practices and legal requirements.
Regulatory Compliance
- Supports compliance with EU legislation for recreational craft, notably Directive 2013/53/EU.
- Contributes to CE marking and declaration of conformity processes for marine products.

Related Standards

ISO 8666 - Small craft – Principal data: Referenced for definitions and measures related to craft size.
IEC 60079-0 - Explosive atmospheres – Equipment general requirements: Provides complementary requirements for explosion-protection in broader industrial contexts.
EN ISO 10133 - Small craft – Electrical systems – Extra-low-voltage DC installations: Focuses on the broader safety of DC electrical installations.
EN ISO 13297 - Small craft – Electrical systems – AC installations: Addresses AC systems, potentially relevant for vessels with such setups.

SIST EN ISO 8846:2026 PDF

Technical details

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Abstract

Overview

Key Topics

Applications

Related Standards

Related standards

Small craft — Electrical devices — Protection against ignition of surrounding flammable gases

Small craft - Principal data (ISO 8666:2020)

Explosive atmospheres - Part 0: Equipment - General requirements

Small craft — Electrical systems — Extra-low-voltage d.c. installations

Small craft - Electrical systems - Alternating and direct current installations