Overview
SIST ISO 4190-6:1997 sets out the planning and selection criteria for installing passenger lifts (elevators) in residential buildings. The standard focuses on ensuring adequate and efficient lift service by enabling developers and building planners to determine the appropriate number and main characteristics of lifts as early as the building design phase. These rules apply specifically to lifts of class I and introduce three service quality levels, based on different waiting intervals at the main floor. By using standardized criteria from this ISO standard, stakeholders can ensure the usability, safety, and service quality of lift installations in residential environments.
Key Topics
- Design Criteria: The standard emphasizes defining the number of lifts and their key features - such as load capacity and speed - at the outset of a residential building project.
- Service Quality Levels: Three distinct programmes (Programme 60, 80, and 100) correspond to different maximum waiting intervals (60, 80, or 100 seconds) at the main floor, allowing for tailored lift service according to building needs.
- Lift Arrangement: Recommends optimal physical arrangements, such as positioning lifts side by side, to facilitate user movement and efficient service.
- Control Systems and Doors: Specifies that collective control systems and automatic car/landing doors should be used to align with standardized residential lift installations.
- Applicability: Intended for residential buildings where the main floor is more than three levels below the highest apartment or where this distance exceeds 8 meters.
- Selection Methodology: Encourages early and careful selection among programmes to ensure the chosen solution matches the residents’ expectations for service and performance.
Applications
- Residential Building Design: Architects and engineers use this standard when planning new apartment blocks or multi-storey жилой complexes to determine the required number, type, and placement of passenger elevators.
- Property Development: Developers reference this standard to ensure their buildings meet recognized international benchmarks for lift service, improving property value and resident satisfaction.
- Renovation Projects: Applies when existing residential buildings are retrofitted or upgraded with new lift installations, ensuring compliance with modern performance expectations.
- Building Regulations: Regulatory authorities and safety inspectors can use the standard to assess and approve residential lift installations for functionality and safety.
By following SIST ISO 4190-6:1997, stakeholders create residential buildings that offer efficient, reliable, and standardized lift service, enhancing everyday accessibility and convenience for residents.
Related Standards
- ISO 4190-1: Covers lifts of classes I, II, and III, providing broader guidance for different types of buildings and usages.
- ISO 4190-2 & ISO 4190-3: Address other classes of lifts-including those in non-residential or service-oriented settings.
- ISO 4190-5: Focuses on control devices, signals, and additional fittings for both passenger and service lifts, which are essential for system integration and user interface.
- ISO 4190-7: Provides additional requirements and recommendations for the design and selection of lifts.
For comprehensive planning and compliance, these related standards should be referenced alongside SIST ISO 4190-6:1997 when specifying or approving lift installations in residential contexts.
Keywords: passenger lifts, residential elevators, lift installation, building design, lift service quality, elevator planning, residential building standards, ISO 4190-6, lift selection criteria, apartment accessibility
